AEG 64070 VIL manual Starting a washing programme, Setting and starting the programme

152963040en per uk.qxp 25/03/2004 15.37 Pagina 27

Operating instructions

Starting a washing programme

In this fully integrated appliance the controls are located on the top of the door. When selecting a programme, the door needs to be open.

1.Check that the baskets have been loaded correctly and that the spray arms can rotate freely

2.Turn on the water tap

3.Press the On/Off button

All the indicator lights of the programme selection buttons illuminate (setting mode).

4.Setting and starting the programme

a)To select a programme, press the programme button of the washing programme you wish to select (see "Washing programmes" chart).

The corresponding indicator light remains illuminated while the other programme buttons indicator lights turn off.

The running time of the selected programme flashes in the digital display.

b)To select the delay start of the programme, press the

"delay start" option button until the number of the hours selected for the delay start, followed by the letter h, will appear in the digital display (e.g. 1h).

The start of the programme or the countdown of the delay start will occur only after the closure of the door, until this moment you can modify the selection made.

Close the dishwasher door.

a)If delay start has not been set, the programme will start automatically. A point-shaped optical signal appears on the floor beneath the appliance’s door. The punctiform light signal is not dangerous as it is not a laser light.

If the appliance has been installed higher up with a furniture door mounted flush, the optical signal will no longer be visible.

If an error message is displayed in the multi-display and/or if an acoustic error message can be heard after the cycle has begun, please read the section “What to do when...”

27