AEG 64070 VIL Wash results are not satisfactory, Dishes are not clean, Dishes are wet and dull

Page 35

152963040en per uk.qxp 25/03/2004 15.37 Pagina 35

Operating instructions

...the wash results are not satisfactory

The dishes are not clean

●The wrong washing programme has been selected.

●The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded.

●The spray arms do not rotate freely due to wrong arrangement of the load.

●The filters in the base of the washing compartment are dirty or incorrectly positioned.

●Too little or no detergent has been used.

●Where there are limescale deposits on the dishes; the salt container is empty or the wrong level of the water softener has been selected.

●The drain hose connection is not correct.

●The salt container cap is not properly closed.

The dishes are wet and dull

●Rinse aid was not used.

●The rinse aid dispenser is empty.

There are streaks, milky spots or a bluish coating on glasses and dishes

●Decrease rinse aid dosing.

Water drops have dried onto glasses and dishes

●Increase rinse aid dosing.

●The detergent may be the cause. Contact the detergent manufacturer’s consumer care line.

35

Image 35

Contents Favorit 64070 VIL Dear customer Following symbols are used in the textContents Child safety Safety instructionsInstallation Your dishwasher in day-to-day use Economical and ecological dishwashing DisposalControl panel Description of the applianceDigital display indicates Something not working with the machine Audible signalsDeactivation/activation of the audible signals Setting the water softener Prior to using for the first timeExample Setting manuallySetting electronically Examples To fill Filling with saltEnsure that the lid is closed after every refill Rinse aidFilling with rinse aid Adjusting the dose Deactivation/activation of the rinse aid dispenser Loading cutlery and dishes Daily useGlazed patterns may fade if machine washed frequently Lower basket Cutlery basket Upper basket To lower the basket to the original position Adjusting the height of the upper basketTo move to the higher position proceed as follows Fill with detergent Use of detergentCombi detergents Different kinds of detergentDetergent tablets Concentrated detergentUse of 3 in 1 combi detergents General adviceSpecial advice Type Degree Washing programmesStarting a washing programme Setting and starting the programmeTo select the delay start of the programme, press Cancel a washing programme in progress To interrupt or cancel a washing programme in progressTo cancel a delay start in progress Unloading the dishwasher End of the washing programmeCleaning the filters Maintenance and cleaningMA40 Moving the machine Frost precautions Prolonged periods of non-operation What to do, when Flashing fault code appearsThere are problems when operating the dishwasher Water drops have dried onto glasses and dishes Dishes are not cleanWash results are not satisfactory Dishes are wet and dullHelp us to help you Customer CareExclusions Standard Guarantee ConditionsThis guarantee does not cover European Guarantee Electrical connection Technical specificationsFixing to the adjacent units Building-inLevelling Water supply connections Please take care when installing the water inlet hose Water inlet hose with safety valveWater outlet hose connection Brown Live Electrical connectionArrangement knives basket Hints for test centres152963040en per uk.qxp 25/03/2004 15.38 Pagina 152963040en per uk.qxp 25/03/2004 15.38 Pagina Postfach 90327 Nürnberg Copyright by AEG