AEG 6281 I manual Connecting the Dishwasher, Water connection, Permitted water pressure

Page 35

Installation and Connection Instructions

Connecting the Dishwasher

Water connection

The dishwasher is fitted with safety devices that prevent the return of wash water into the drinking water system and comply with the appli- cable plumbing regulations.

•The dishwasher can be connected to cold and hot water supplies up to max. 60 °C.

•The dishwasher must not be connected to open hot water appliances or instantaneous water heaters.

Permitted water pressure

Lowest permitted water pressure:

For a water pressure of less than 2 bar

1 bar (=10N/cm2 =100 kPa)

please seek advice from customer service.

Highest permitted water pressure:

In the case of a water pressure greater

10 bar (=100 N/cm2 =1 MPa)

than 10 bar, a pressure reduction valve

 

must be used (available from your

 

dealer).

 

 

 

Connect the inlet hose

1

The water inlet hose must not be kinked, crushed or entangled when it

 

is being connected up.

0Connect the threaded hose fitting (DIN 259) on the water inlet hose to a tap with an external thread (¾ inch). Tighten the threaded hose fit- ting only by hand.

3

• In order that access to the tap in the kitchen is not limited by the use

 

of the dishwasher, we recommend the installation of an additional

tap, or the fitting a two way adapter to the existing tap.

• If you need a longer water inlet hose than that supplied, the follow- ing VDE approved complete hose sets are to be used, these are availa- ble from your dealer:

– Hose set "WRflex 100" (E No.: 911 239 034)

– Hose set "WRflex 200" (E No.: 911 239 035)

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Ökofavorit 6281 Use of the appliance are marked with a clover leaf Tips on using the applianceDear customer Please read these user instructions carefullyContents Installation and Connection Instructions Child Safety Safety instructionsInstallation, connection and initial use Intended use General safetyPOM For polyoxymethylene, e.g. plastic clips DisposalDisposing of the Packaging Material Disposal of old appliancesEconomical and Ecological Dishwashing Appliance Features and Control Panel Control panel Prior to using for the first timeHardness range of the water in your area Adjust the water softenerAdjust SaltTurning it anticlockwise Filling with Special Salt for the Water SoftenerFill with special salt Use special salt Open the door, remove the lower RackFill with rinse aid Filling with Rinse AidThat you glasses are clear Would damage the applianceDaily Use Adjusting Rinse Aid DosingBase Loading cutlery and dishesNot be washed in the dishwasher Before loading the dishes, you shouldLoading Cutlery Load large and heavily soiled dishes in the lower rack Loading Pans, Frying Pans Large PlatesLoading Cups, Glasses and Coffee Services Maximum Height of the Dishes Adjusting the Height of the Upper RackLowering the Upper Rack Raising the Upper RackTions given on the detergent packaging Filling with DetergentUse only dishwasher detergent Fill with DetergentBio Wash Programmes and Concentrated Detergents Selecting the Wash Programme Programme Table Changing the wash programme Changing/Interrupting/CancellingStart the wash programme Wash ProgrammeChanging the start delay Setting or Changing the Start Delay TimerCancelling the wash programme Setting the start delay timerEmptying the Dishwasher Switching Off the DishwasherLoad Sensing Sensor Logic Cleaning the Filter Care and CleaningPut the flat filter back in the base Washing compartment What to do, whenMalfunction Possible Cause Remedy Error Messages Are DisplayedWrong wash programme was selected Problems occur during use of the dishwasherWash results are not satisfactory Dishes are still dirtyLower rinse aid dosing Technical DataDishes are wet and dull Rinse aid was not used Rinse aid container is emptyBottom rack with cutlery basket An open-end spanner Screwdriver Installing the DishwasherFree-Standing Appliances Dishwashers That Can Be IntegratedBuilt-In Dishwasher Fitted with a décor panel to match Plinth on free-standing appliances is not adjustableWork surface must be re-mounted Free-standing appliances can beConnect the inlet hose Connecting the DishwasherWater connection Permitted water pressureExtension hoses are available from Water drainDrain hose Extension hosesAppliance is automatically pumped out Leak Prevention SystemElectrical connection Connections Croatia New Zealand E. Abu Dhabi Jordan MaltaEgypt Kanada Mauritius Australia Korea South NamibiaJapan Singapore Estonia LataviaHongkong Lthuania Israel MalaysiaOtros puntos de Postventa en el extranjero Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Weitere Kundendienststellen im AuslandPage Service

6281 I specifications

The AEG 6281 I is an advanced built-in induction hob that combines elegant design with cutting-edge technology, making it a popular choice for modern kitchens. Known for its excellent performance and user-friendly features, this appliance demonstrates AEG's commitment to quality and innovation in kitchen devices.

One of the prominent features of the AEG 6281 I is its induction cooking technology. Induction hobs use electromagnetic fields to heat pots and pans directly, ensuring that the cooktop surface remains cool to the touch. This not only enhances safety but also promotes energy efficiency since heat is generated directly in the cookware, reducing heat loss and cooking time.

The hob provides a sleek surface with intuitive controls, which include touch controls that allow for precise temperature adjustments. Users can easily access various cooking levels, from gentle simmers to rapid boiling, ensuring versatility in cooking methods. The AEG 6281 I also incorporates a digital display that enhances the overall cooking experience by providing clear information about the selected power levels.

Another noteworthy aspect is the hob's flexible cooking zones, which accommodate different pot sizes, ensuring that every meal is cooked evenly and efficiently. This model features the bridging function, enabling users to combine two cooking zones into one larger area, perfect for griddle pans or large pots.

AEG has also integrated a range of safety features into the 6281 I, including a child lock to prevent accidental activation, automatic shut-off for safety if a pot is removed, and residual heat indicators that signal when the cooking zones are still hot.

Additionally, the hob's design pays homage to modern aesthetics, featuring a minimalist black glass surface that fits seamlessly into various kitchen styles. With a width of 60 centimeters, it is ideal for standard kitchen spaces while offering ample cooking surface for various culinary needs.

Overall, the AEG 6281 I represents a perfect blend of style, safety, and efficiency, making it an excellent choice for any cooking enthusiast seeking to elevate their kitchen experience. With its innovative technology and user-friendly features, this induction hob stands out in the competitive market of kitchen appliances.
Top Page Image Contents