AEG 80800 manual Connecting the Dishwasher, Water Connection, Permitted water pressure

Page 39

Installation and Connection Instructions

Connecting the Dishwasher

Water Connection

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

The dishwasher can be connected to cold and hot water supplies up to max. 60 °C.

The dishwasher must not be connected to open hot water appliances or instantaneous water heaters.

Permitted water pressure

Lowest permitted water pressure:

Consult your installer if the water pres-

1 bar (=10 N/cm2 =100 kPa)

sure is less than 1 bar.

Highest permitted water pressure:

In the case of a water pressure greater

10 bar (=100 N/cm2 =1 MPa)

than 10 bar, a pressure reduction valve

 

must be used (available from your

 

dealer).

 

 

 

Connect the inlet hose

1

The water inlet hose must not be kinked, crushed or entangled when it

 

is being connected up.

0Connect the threaded hose fitting (ISO 228-1:2000) on the water inlet hose to a tap with an external thread (¾ inch). Tighten the threaded hose fitting hand tight only.

3

• In order that access to the tap in the kitchen is not limited by the use

 

of the dishwasher, we recommend the installation of an additional

tap, or fitting a two way adapter to the existing tap.

• If you need a longer water inlet hose than that supplied, VDE approved complete hose sets are to be used. These are available from your local Service Force Centre.

39

Image 39
Contents Ökofavorit Use of the appliance are marked with a clover leaf Tips on using the applianceDear customer Please read these user instructions carefullyContents Installation and Connection Instructions Safety Instructions Installation, Connection and Placing into OperationChild Safety Correct Use General SafetyPOM For polyoxymethylene, e.g. plastic clips DisposalDisposing of the Packaging Material Disposal of old appliancesEconomical and Ecological Dishwashing Appliance Features and Control Panel Multi-Display can display Control PanelHardness range of the water in your area Prior to using for the first timeAdjusting the Water Softener Special saltTurning it anticlockwise Filling with Special Salt for the Water SoftenerFill with special salt Use special salt Open the door, remove the lower RackOperating Instructions Fill with rinse aid Filling with Rinse AidThat you glasses are clear Would damage the applianceSetting the Signal Tone for the End of the Wash Pro- gramme Adjusting Rinse Aid DosingFor washing in the dishwasher the following cutlery/dishes Daily UseLoading cutlery and dishes Not be washed in the dishwasherLoading Cutlery To avoid damage to glasses, they must not touchDo not lay small objects e.g. lids in the cutlery rack Work surface If you use the grid insert, it is notTo ensure that the cutlery basket Both parts of the two part handleLoad large and heavily soiled dishes in the lower rack Loading Pans, Frying Pans Large PlatesLoading Cups, Glasses and Coffee Services Raising the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Type Lowering the Upper BasketFill with detergent Filling with DetergentAutomatic Wash Programmes Bio Wash Programmes and Concentrated DetergentsSelecting the Wash Programme Programme Table Suitable SoilingStarting the Wash Programme GrammeChanging the wash programme Cancelling the wash programme Pause FunctionWasher Load Sensing Sensor Logic Setting or Changing the Start Delay TimerSetting the start delay timer Changing the start delayCare and Cleaning Switching Off the DishwasherEmptying the Dishwasher Cleaning the Filter Constantly repeated Error messages are displayedWhat to do, when Malfunction Possible Cause RemedyOpen the door carefully Wrong wash programme was selected There are problems with the operation of the dish- washerWash result is not satisfactory Dishes are still dirtyDecrease rinse aid dosing Drain hose is incorrectly laidDishes are wet and dull Rinse aid was not used Rinse aid container is emptyDishwasher Free-Standing Appliances Dishwashers that Can Be Integrated, Built-In DishwashersDishwashers that Can Be Fully Integrated Sample loading arrangements Upper basket without cutlery trayLower basket with cutlery basket Cutlery basket Installing the Dishwasher Crushed when the dishwasher is in positionFree-Standing Appliances Unscrew the screws 1 from the elbows on the back side Connect the inlet hose Connecting the DishwasherWater Connection Permitted water pressureSink outlet connection Water drainDrain hose Extension hosesLeak Prevention System Electrical connectionAppliance is automatically pumped out Connections Telefon Telefax Adressen KlantendienstGarantiebepalingen Bergensesteenweg, 719-1502 Lembeek. Tél /363.04.44 Page Service AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

80800 specifications

The AEG 80800 is a versatile and innovative appliance designed to enhance the convenience and efficiency of home cooking. This product has been meticulously engineered to cater to the needs of modern households, offering a range of features that streamline meal preparation.

One of the standout characteristics of the AEG 80800 is its powerful performance. It often integrates high-efficiency cooking technologies that ensure even heat distribution, leading to perfectly cooked meals every time. The appliance is equipped with an advanced heating element that significantly reduces cooking times, allowing users to save time in the kitchen without compromising on culinary quality.

The user interface of the AEG 80800 is designed with simplicity in mind. It typically features an intuitive digital display that makes it easy to select and monitor cooking settings. The interface allows users to adjust temperature and cooking time with precision, providing control over the cooking process. Many models also offer a variety of pre-set cooking programs, catering to different dishes and cooking styles.

Safety is a priority in the design of the AEG 80800. This appliance often includes features such as an automatic shut-off function, overheating protection, and thermal insulation, ensuring that it operates safely during use. These elements not only enhance user confidence but also contribute to the longevity of the product.

Energy efficiency is another key highlight of the AEG 80800. As energy consumption becomes a more significant concern for many households, this appliance is built to consume minimal electricity while delivering maximum output. This not only helps to reduce utility bills but also aligns with eco-friendly practices.

In terms of design, the AEG 80800 typically boasts a sleek and modern appearance, making it an attractive addition to any kitchen decor. Its compact size ensures that it fits well in smaller spaces while still offering ample cooking capacity. The materials used in its construction are often high-quality and easy to clean, promoting hassle-free maintenance.

In summary, the AEG 80800 is a standout appliance that embodies efficiency, safety, and modern design. Its advanced cooking technologies, user-friendly interface, and energy-saving capabilities make it an excellent choice for anyone looking to upgrade their kitchen appliances. With its reliable performance and stylish aesthetics, the AEG 80800 is sure to meet the demands of contemporary cooking while enhancing the overall culinary experience.