AEG 80800 manual Starting the Wash Programme, Gramme, Changing the wash programme

Page 26

Operating Instructions

Starting the Wash Programme

0 1. Check that the dishes and cutlery are loaded into the dishwasher in such a manner that the spray arms are free to rotate.

2.Open the tap fully.

3.Shut the door.

4.Press the ON/OFF switch (AAN/UIT; MARCHE/ARRET) The ON/OFF switch indicator (AAN/UIT; MARCHE/ARRET) illuminates.

5.Press the button for the programme required (see “Programme Table“). The programme indicator and the associated wash programme steps in the programme progress display illuminate. After around 6 seconds, the wash programme selected starts. The remaining time for the pro- gramme calculated from quantity of dishes loaded is displayed in the multi-display. With automatic programme adjustment this residual time count can be stopped or corrected if necessary (load quantity, degree of dirtiness, etc.) using the dishwasher control. The current pro- gramme step is also displayed in the programme progress display.

3

If fault messages are displayed on the multi-display after the start of

 

the programme, please read the “What to do, if...“ section.

 

Changing/Interrupting/Cancelling the Wash Pro-

 

gramme

3

Only change or interrupt a wash programme in progress if it is abso-

 

lutely necessary. When the appliance is closed again, the air that has

 

entered is heated rapidly and expands. This can cause water to escape

 

onto the floor and possibly trigger the anti-flood system.

 

Changing the wash programme

3

If you want to change the wash programme within the first 6 seconds

 

after the selection of the programme, briefly press the button for the

 

required programme.

 

If you want to change the wash programme at a later point in time, use

 

the following procedure:

0 1. Press the button for the new wash programme and keep it pressed. The indicators for both wash programmes now flash.

2.After a few seconds, only the display for the new wash programme flashes. Release the programme button, from now on the new wash programme is carried out.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Ökofavorit Please read these user instructions carefully Tips on using the applianceDear customer Use of the appliance are marked with a clover leafContents Installation and Connection Instructions Child Safety Safety InstructionsInstallation, Connection and Placing into Operation General Safety Correct UseDisposal of old appliances DisposalDisposing of the Packaging Material POM For polyoxymethylene, e.g. plastic clipsEconomical and Ecological Dishwashing Appliance Features and Control Panel Control Panel Multi-Display can displaySpecial salt Prior to using for the first timeAdjusting the Water Softener Hardness range of the water in your areaUse special salt Open the door, remove the lower Rack Filling with Special Salt for the Water SoftenerFill with special salt Turning it anticlockwiseOperating Instructions Would damage the appliance Filling with Rinse AidThat you glasses are clear Fill with rinse aidAdjusting Rinse Aid Dosing Setting the Signal Tone for the End of the Wash Pro- grammeNot be washed in the dishwasher Daily UseLoading cutlery and dishes For washing in the dishwasher the following cutlery/dishesDo not lay small objects e.g. lids in the cutlery rack Loading CutleryTo avoid damage to glasses, they must not touch Both parts of the two part handle If you use the grid insert, it is notTo ensure that the cutlery basket Work surfaceLoading Pans, Frying Pans Large Plates Load large and heavily soiled dishes in the lower rackLoading Cups, Glasses and Coffee Services Lowering the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Type Raising the Upper BasketFilling with Detergent Fill with detergentBio Wash Programmes and Concentrated Detergents Automatic Wash ProgrammesSelecting the Wash Programme Programme Table Soiling SuitableChanging the wash programme Starting the Wash ProgrammeGramme Washer Cancelling the wash programmePause Function Changing the start delay Setting or Changing the Start Delay TimerSetting the start delay timer Load Sensing Sensor LogicEmptying the Dishwasher Care and CleaningSwitching Off the Dishwasher Cleaning the Filter Malfunction Possible Cause Remedy Error messages are displayedWhat to do, when Constantly repeatedOpen the door carefully Dishes are still dirty There are problems with the operation of the dish- washerWash result is not satisfactory Wrong wash programme was selectedRinse aid was not used Rinse aid container is empty Drain hose is incorrectly laidDishes are wet and dull Decrease rinse aid dosingDishwashers that Can Be Fully Integrated Dishwasher Free-Standing AppliancesDishwashers that Can Be Integrated, Built-In Dishwashers Lower basket with cutlery basket Cutlery basket Sample loading arrangementsUpper basket without cutlery tray Free-Standing Appliances Installing the DishwasherCrushed when the dishwasher is in position Unscrew the screws 1 from the elbows on the back side Permitted water pressure Connecting the DishwasherWater Connection Connect the inlet hoseExtension hoses Water drainDrain hose Sink outlet connectionAppliance is automatically pumped out Leak Prevention SystemElectrical connection Connections Adressen Klantendienst Telefon TelefaxGarantiebepalingen Bergensesteenweg, 719-1502 Lembeek. Tél /363.04.44 Page Service AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

80800 specifications

The AEG 80800 is a versatile and innovative appliance designed to enhance the convenience and efficiency of home cooking. This product has been meticulously engineered to cater to the needs of modern households, offering a range of features that streamline meal preparation.

One of the standout characteristics of the AEG 80800 is its powerful performance. It often integrates high-efficiency cooking technologies that ensure even heat distribution, leading to perfectly cooked meals every time. The appliance is equipped with an advanced heating element that significantly reduces cooking times, allowing users to save time in the kitchen without compromising on culinary quality.

The user interface of the AEG 80800 is designed with simplicity in mind. It typically features an intuitive digital display that makes it easy to select and monitor cooking settings. The interface allows users to adjust temperature and cooking time with precision, providing control over the cooking process. Many models also offer a variety of pre-set cooking programs, catering to different dishes and cooking styles.

Safety is a priority in the design of the AEG 80800. This appliance often includes features such as an automatic shut-off function, overheating protection, and thermal insulation, ensuring that it operates safely during use. These elements not only enhance user confidence but also contribute to the longevity of the product.

Energy efficiency is another key highlight of the AEG 80800. As energy consumption becomes a more significant concern for many households, this appliance is built to consume minimal electricity while delivering maximum output. This not only helps to reduce utility bills but also aligns with eco-friendly practices.

In terms of design, the AEG 80800 typically boasts a sleek and modern appearance, making it an attractive addition to any kitchen decor. Its compact size ensures that it fits well in smaller spaces while still offering ample cooking capacity. The materials used in its construction are often high-quality and easy to clean, promoting hassle-free maintenance.

In summary, the AEG 80800 is a standout appliance that embodies efficiency, safety, and modern design. Its advanced cooking technologies, user-friendly interface, and energy-saving capabilities make it an excellent choice for anyone looking to upgrade their kitchen appliances. With its reliable performance and stylish aesthetics, the AEG 80800 is sure to meet the demands of contemporary cooking while enhancing the overall culinary experience.
Top Page Image Contents