CD/MP3 Operation

29118 rev2 8/8/06 13:05 Page 10

Programming preset stations

You can also preset stations of your choice and store up to 10 MW and 30 FM stations in its memory. To store your selected broadcasting stations:

1Press the BAND button on the unit (or remote) to toggle between MW and FM to make your selection.

2Tune to the required station.

3Press the MEMORY/CLK-ADJ button.

4Press the PRESET/FOLDER (UP or DOWN) button for your desired station number.

5Press the MEMORY/CLK-ADJ again to confirm your selection.

6To program more stations into memory, repeat the above steps 2 to 5.

7To change the stored preset stations, repeat the above steps 2 to 5.

NOTES:

1Storing a new station into a preset location will erase the previously stored station in that location.

2Power off/failure or power cord disconnection will clear the memory of all preset stations. Perform the stations presetting procedures again to store the stations.

FM Antenna

Make sure the FM lead wire antenna is unwound and extended to its full length. It may be necessary to vary the direction of this wire antenna unit you find the position that provides the best reception for your favourite FM stations.

Listening to compact

	disc CD/MP3
1	Press FUNCTION until display	I
	shows CD.
2	IF you want to enjoy CD/MP3,
	press the CD DOOR
	OPEN/CLOSE button on the
	unit first, then the CD door will
	open automatically I.
	open automatically I.	J
		J
3	Insert the CD/MP3 disc into the
	CD compartment, press the CD
	DOOR OPEN/CLOSE button
	again, then the CD door will
	close automatically.
	NOTE:
1	This unit can play CD, CD-R,
	CD-RW and MP3 discs.
2	If no disc or can’t read TOC, NO
	DISC will be displayed J.

Playing the entire

CD/MP3

1 Playback will start by pressing K PLAY/PAUSE. Playback starts with the first track. The display shows the current track number and its elapsed time K.