AEG 40740 manual Connecting the Dishwasher, Water Connection, Permitted water pressure

Page 39

Installation and Connection Instructions

Connecting the Dishwasher

Water Connection

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

•The dishwasher must be connected to a cold water supply.

•The dishwasher must not be connected to open hot water appliances or instantaneous water heaters.

Permitted water pressure

Lowest permitted water pressure:

Consult your installer if the water pres-

1 bar (=10 N/cm2 =100 kPa)

sure is less than 1 bar.

Highest permitted water pressure:

In the case of a water pressure greater

10 bar (=100 N/cm2 =1 MPa)

than 10 bar, a pressure reduction valve

 

must be used (available from your

 

dealer).

 

 

 

Connect the inlet hose

1

The water inlet hose must not be kinked, crushed or entangled when it

 

is being connected up.

0Connect the threaded hose fitting (ISO 228-1:2000) on the water inlet hose to a tap with an external thread (¾ inch). The inlet hose is equipped either with a plastic or with a metal connection nut:

–Tighten plastic hose connection nuts by hand only.

–Metal hose connection nuts must be tightened using an appropriate tool. Finally, visually check that it is water-tight (ensure that the tap is not dripping).

3

• In order that access to the tap in the kitchen is not limited by the use

 

of the dishwasher, we recommend the installation of an additional

tap, or fitting a two way adapter to the existing tap.

• If you need a longer water inlet hose than that supplied, VDE approved complete hose sets are to be used. These are available from your local Service Force Centre.

• Do not use, for connection, old hoses which have been used for another appliance.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Favorit Pass them on to any subsequent owner of the appliance Tips on using the applianceDear customer Please read these user instructions carefullyContents Installation and Connection Instructions General Safety Safety InstructionsInstallation, Connection and Placing into Operation Child SafetyCorrect Use Disposal of Old Appliances DisposalEconomical and Ecological Dishwashing Disposing of the Packaging MaterialAppliance Features and Control Panel Ning Control panelPanel Prior to using for the first timeWater softener TabletsPress the ON/OFF button Setting the water softenerSetting manually Setting electronicallyWater can be softened in one of two ways Manual Electronic Number Addition of special salt SettingSpecial salt for the water softener Use special salt or salt substituteAdding special salt Not have to be deactivated see 3 in 1 function Rinse aidActivating/deactivating the inflow of rinse aid Rinse aid can be added in one of two waysDisplay will indicate the current setting Adding rinse aidFully open the rinse aid compartment lid Adjusting Rinse Aid Dosing For washing in the dishwasher the following cutlery/dishes Daily UseLoading Cutlery and Dishes Not be washed in the dishwasherLoading Cutlery Two right-hand plate inserts Loading Pans, Frying Pans Large PlatesFolded over to the left To ease the loading of large itemsBaskets can be folded across one another Folded across one anotherAcross one another Two rear plate inserts in the lowerLoading Cups, Glasses Coffee Services Adjusting the Height of the Upper Basket Lowering the Upper BasketRaising the Upper Basket Fill with detergent Filling with DetergentGeneral Advice Special AdviceUse of 3 in 1/ Combi Detergent Tablets Detergent tablets Concentrated DetergentSelecting the Wash Programme Programme Table Anti-flood system Starting a wash programmeGramme Has started, please read the section What to do ifChanging the start delay Setting or changing the start delayCancelling the wash programme Reset Setting the start delayImmediately after the end of the programme Switching Off the DishwasherLoad Sensing Sensor Logic Emptying the DishwasherCleaning the Filter Care and CleaningStances Following sequence Error messages are displayedWhat to do, if Malfunction Possible cause RemedyCentre ContinueWrong wash programme was selected There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are still dirtyLower rinse aid dosing Technical DataDishes are wet and dull Rinse aid was not used Rinse aid container is emptySample loading arrangements Upper basketLower basket with cutlery basket Free-Standing Appliances Installing the DishwasherSee enclosed installation instructions Built-Under DishwasherWork surface must be re-mounted Plinth on free-standing appliances is not adjustableConnect the inlet hose Connecting the DishwasherWater Connection Permitted water pressurePlease take care when installing the water inlet hose Water inlet hose with safety valveWater drain Appliance is automatically pumped out Leak Prevention SystemChanging a fuse Electrical ConnectionConnections Standard guarantee conditions European GuaranteeExclusions Page 08705 929 Customer CareCalls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

40740 specifications

The AEG 40740 is a state-of-the-art washing machine that embodies modern efficiency and convenience, perfect for households looking to simplify their laundry experience without compromising on performance. Packed with innovative technologies and thoughtful design features, the AEG 40740 stands out in the competitive laundry appliance market.

One of the standout characteristics of the AEG 40740 is its impressive Energy Efficiency Class, which ensures that it operates with minimal energy consumption while still providing powerful cleaning capabilities. This not only contributes to lower utility bills but also aligns with environmentally friendly practices, making it a responsible choice for eco-conscious consumers.

The AEG 40740 incorporates advanced ProSense Technology, which automatically adjusts the washing cycle based on the load size. This feature optimizes water and energy consumption, ensuring that each load is treated appropriately, whether it’s a small batch of delicate fabrics or a full load of heavy-duty items. Users appreciate this flexibility as it allows for thorough washing without wasted resources.

Another noteworthy technology featured in the AEG 40740 is the SoftWater system. This unique approach uses a special filter to soften the water, which enhances detergent efficacy and protects fabrics. By reducing the hardness of the water, the machine helps maintain the quality and appearance of clothes, ensuring they look newer for longer. This technology is pivotal for maintaining vibrant colors and preventing fabric wear.

In terms of capacity, the AEG 40740 is designed to handle large loads, making it ideal for busy households. With a generous drum capacity, it accommodates everything from everyday laundry to bulkier items like bedding and towels, streamlining laundry tasks and saving precious time.

Another feature that stands out is its quiet operation. The machine is engineered to reduce noise levels during both washing and spinning, allowing users to run cycles at any time without disturbing the household. This is particularly beneficial for those living in apartments or shared spaces.

User-friendliness is also a hallmark of the AEG 40740. It comes equipped with an intuitive control panel, allowing for easy selection of programs and settings. With a range of tailored programs available, including settings for specific fabrics and stain removal, users can achieve optimal results with minimal effort.

In summary, the AEG 40740 is a top-tier washing machine that combines cutting-edge technology with practical features designed to enhance the laundry experience. From energy efficiency and load optimization to gentle fabric care and quiet operation, it offers everything a modern household needs for effective and reliable laundry care.
Top Page Image Contents