AEG 34350 I manual Connection instructions, Connecting the water supply

Page 31

Connection instructions

Connecting the water supply

●Your dishwasher can be connected to either a cold or hot water supply of max. 60°C.

●Never connect your dishwasher to open hot water appliances and continuous flow heaters!

Nevertheless we advise you a cold water supply. A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes.

Avoid bends or kinks in the hose which could prevent or slow down the water supply.

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. This will prevent deposits of sand or rust clogging the inlet hose.

The water pressure must be within the limits given in the technical specifications.

Your dishwasher has been built in accordance with the valid regulations governing water-consuming appliances and is equipped with safety devices which prevent used water from flowing back into the drinking water mains.

31

Image 31

Contents Ökofavorit 34350 Please read these user instructions carefully Dear customerContents Child safety Safety instructionsUsing your dishwasher for its intended purpose Before using your dishwasher for the first timeYour dishwasher in day-to-day use Disposing of your old machine Disable the door lock so that the door no longer closesDisposing of packaging and old machine Disposing of the packagingEconomical and ecological dishwashing Inside of the appliance Description of the appliancePrewash/Rinse and Hold Wash Cold rinse Hot rinse Drying Level Use Softener Before using your dishwasher for the first timeSetting the water hardness range Water hardnessLevel To fill Filling with special saltEnsure that the lid is closed after every refill Salt refill indicatorRinse-aid Filling up the rinse-aidAdjusting the dose Loading cutlery and dishes Upper basket Lower basketCutlery basket Use of detergent If using detergent in tablets proceed as followsPhosphate free detergents with enzymes Type of load Washing programmesStarting Required Programmes Type of soil PushbuttonCycle description Approximate valuesSet the programme Operating instructionsCheck the filters Check that there is rinse aid and salt Load the dishesAt the end of the washing programme Internal and external cleaning Maintenance and cleaningCleaning the filters MA23 What to do, when Dishes are not quite dry Dishes are not cleanWash results are not satisfactory Visible lime deposits or white film on the dishesCustomer service Technical specifications Technical dataHints for test centres Connection instructions Connecting the water supplyWater outlet connection Extension hoses Electrical connection Water protection systemCopyright by AEG 152985 45/2