Ice pack, Preparation of Ice Cubes, Positioning

1.Place the packed food in the drawers. Place food to be frozen in the upper drawer. Unfrozen food must not touch items already frozen, otherwise the frozen food could begin to defrost.

2.When freezing fresh food, depress the ambient temperature switch (A) 12 hours before loading the food without modifying the thermostat setting. The pilot light will come on. At the end of the freezing process, do not for- get to depress again the ambient switch in order to avoid an increase of the power consumption.

3.Place frozen foods in the drawers sorted by type, as far as possible.

4.If large quantities of food are to be stored, remove all drawers and baskets

from appliance and place food on cooling shelves. Pay careful attention not

to exceed load limit stated on the side of the upper section

Ice pack

There are two ice packs in one drawer of the freezer.

In the event of a power failure or malfunction, the ice pack will lengthen the amount of time it takes for the frozen food to become too warm by several hours. The ice pack can only fulfil this task efficiently if it is placed in the uppermost drawer, at the front, above the frozen food. You can use

Positioning

This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rat- ing plate, which is located on the inside left of the appliance.

The following table shows which ambient temperature is correct for each climate classification.

Climate classification		for an ambient temperature of


SN		+10 to +32 °C

N		+16 to +32 °C

The appliance should be located in a dry atmosphere, out of direct sunlight and away from continuous heat and extreme temperature, e.g. not next to a boiler or radiator, or in a very cold room e.g. an outhouse. If these tem- peratures are exceeded i.e. warmer or colder, then the appliance may not operate correctly.

For building-in and door reversal instructions please refer to the relevant instructions on the following pages.

the ice pack for cooling cold bags.

Preparation of Ice Cubes

1.Fill the ice cube tray 3/4 full with cold water, place it in the freezer com- partment and leave to freeze.

2.To loosen the frozen cubes, either twist the ice cube tray or hold it under running water for a few seconds.

Important! Never try to free an ice tray that is frozen to the freezer com- partment using pointed or sharp edged objects. Use the ice scraper supplied.

Your appliance needs air

For safety reasons, minimum ventila- tion must be as shown Fig.

Attention: keep ventilation openings clear of obstruction;

50 mm	min.
50 mm	200 cm2
	min.
	200 cm2
D567

Reversing the door

The side the door opens can be changed from the right side (factory adjust- ment) to the left side, if the installation site requires.

Warning! When changing the side the door opens, the appliance must not be connected to the mains. Remove plug from the mains beforehand.

C 7 18 41 I specifications

The AEG C 7 18 41 I is an advanced piece of technology that stands out in the crowded field of home appliances, particularly as a powerful and efficient cleaning device. This vacuum cleaner, designed for both functionality and user convenience, is tailored for the modern household.

One of the main features of the AEG C 7 18 41 I is its impressive suction power, which is powered by a robust motor that ensures effective cleaning across various surfaces. Whether on carpets, hardwood floors, or tiles, this vacuum cleaner adapts seamlessly to different types of flooring, delivering exceptional results every time. The multi-cyclonic technology employed in the AEG C 7 18 41 I optimizes airflow and minimizes the loss of suction, ensuring that dirt and debris are efficiently captured.

Another standout feature of the C 7 18 41 I is its lightweight design, making it easy to maneuver and transport. Weighing significantly less than many traditional vacuum cleaners, users can navigate through tight spaces and carry it up staircases without unnecessary strain. The ergonomic handle further enhances user comfort, allowing for extended cleaning sessions without fatigue.

The AEG C 7 18 41 I is also equipped with a large capacity dust container, reducing the frequency of emptying and making it ideal for larger homes or families. This dust container is designed for easy removal and cleaning, featuring a hygienic emptying mechanism that minimizes dust clouds and allergens during disposal.

In terms of filtration, the vacuum cleaner incorporates a highly-effective HEPA filter that captures 99.97% of particles as small as 0.3 microns. This makes it an excellent choice for allergy sufferers or households with pets, as it significantly reduces the number of allergens circulating in the air.

The AEG C 7 18 41 I is not just efficient in cleaning; it is also equipped with various settings and tools to assist in specialized cleaning tasks. With a range of attachments including crevice tools, upholstery brushes, and dusting brushes, users can tackle a wide array of cleaning challenges effectively.

Overall, the AEG C 7 18 41 I exemplifies innovation and practicality, making it a valuable addition to any cleaning arsenal. Its combination of powerful suction, lightweight design, large capacity, and advanced filtration ensures that users can maintain a clean and healthy living environment with ease.