AEG C 7 18 41 I installation instructions Something Not Working, Changing the light bulb

Page 14

•Do not leave the door open any longer than necessary.

•Do not set temperature any colder than necessary.

•Put frozen food in the fridge to defrost. The cold in the frozen food will then be used to cool the fridge.

Something Not Working

If the appliance is not functioning correctly, please carry out the following checks before contacting your local AEG Service Force Centre.

Warning!

Repairs should only be carried out by qualified service engineers. Repairs carried out by inexperienced persons may cause injury or serious malfunc- tioning.

Symptom

 

Possible Cause

 

Remedy

 

 

 

 

 

 

Symptom

 

Possible Cause

 

Remedy

 

 

 

 

 

 

The compressor does not start

This is normal, no error has

The compressor starts after a

 

immediately after changing

 

occurred.

 

period of time.

 

the temperature setting.

 

 

 

 

 

 

 

 

 

 

Water on the floor or on sto-

Water drain hole is blocked.

See the "Cleaning and Care"

 

rage shelves.

 

 

 

section.

 

 

 

 

 

 

If, after carrying out the necessary checks there is still a fault with your appliance please contact your local AEG Service Force Centre.

In guarantee customers should ensure that the suggested checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

Please note that proof of purchase is required for any in-guarantee service calls.

Changing the light bulb

 

 

Appliance is not switched on

 

 

 

 

 

Mains plug is not plugged in

Appliance does not work.

 

or is loose.

 

 

 

Fuse has blown or is defective.

 

 

 

 

 

 

 

 

 

 

Socket is defective.

 

 

 

 

 

 

Appliance cools too much.

 

Temperature is set too cold.

 

 

 

Switch on the appliance.

Insert mains plug.

Check fuse, replace if neces- sary.

Mains malfunctions are to be corrected by an electrician. Turn the temperature control knob to a warmer setting.

Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it. Light bulb data: 220-240 V, max. 15 W

1.

To switch off the appliance, turn the

 

temperature control knob to position

 

"0".

2.

Unplug the mains plug.

3.

To change the light bulb, remove the

Temperature is not properly adjusted.

Door was open for an exten- ded period.

The food is too warm. A large quantity of warm food was placed in the appliance within the last 24 hours.

The appliance is near a heat source.

Interior lighting does not work. Light bulb is defective.

Heavy build up of frost, possi-

 

Door seal is not air tight (pos-

bly also on the door seal.

 

sibly after reversing the door).

 

 

 

Please look in the "Initial Start Up" section.

Open the door only as long as necessary.

Turn the temperature control knob to a colder setting.

Please look in the "Installation location" section.

Please look in the "Changing the Light Bulb" section. Carefully warm the leaking sections of the door seal with a hair dryer (not hotter than approx. 50 °C). At the same time shape the warmed door seal by hand until it sits cor- rectly.

 

screw from the light bulb cover.

4.

Unhook the light bulb cover as

 

shown.

5.

Change the defective light bulb.

6.

Refit the light bulb cover and the

 

screw.

7.Put the refrigerator back into opera- tion.

14

15

Page 13 Page 14
Image 14
Page 13 Page 14
Contents Santo C 7 18 41 Dear customer Contents Intended use SafetySafety of children Prior to initial start-upDisposal ServiceRegulations, Standards, Guidelines Daily OperationDisposal of old Appliances Remove transport packagingDescription of the appliance Starting up and temperature regulation Relevant pilot light comes onInstructions for building-in Storage Shelves Interior AccessoriesFresh food refrigeration Variable Inner DoorHeight Housing dimensionsFreezing and storing frozen food DepthPositioning Ice packPreparation of Ice Cubes Your appliance needs airDefrosting InstallationStorage Goods Symbols/Freezing Calendar Electrical ConnectionCleaning and Care Guarantee ConditionsSwitching off the appliance Guarantee ConditionsCustomer Care Department Service and Spare Parts0870 5 Energy Saving TipsSomething Not Working Changing the light bulb

C 7 18 41 I specifications

The AEG C 7 18 41 I is an advanced piece of technology that stands out in the crowded field of home appliances, particularly as a powerful and efficient cleaning device. This vacuum cleaner, designed for both functionality and user convenience, is tailored for the modern household.

One of the main features of the AEG C 7 18 41 I is its impressive suction power, which is powered by a robust motor that ensures effective cleaning across various surfaces. Whether on carpets, hardwood floors, or tiles, this vacuum cleaner adapts seamlessly to different types of flooring, delivering exceptional results every time. The multi-cyclonic technology employed in the AEG C 7 18 41 I optimizes airflow and minimizes the loss of suction, ensuring that dirt and debris are efficiently captured.

Another standout feature of the C 7 18 41 I is its lightweight design, making it easy to maneuver and transport. Weighing significantly less than many traditional vacuum cleaners, users can navigate through tight spaces and carry it up staircases without unnecessary strain. The ergonomic handle further enhances user comfort, allowing for extended cleaning sessions without fatigue.

The AEG C 7 18 41 I is also equipped with a large capacity dust container, reducing the frequency of emptying and making it ideal for larger homes or families. This dust container is designed for easy removal and cleaning, featuring a hygienic emptying mechanism that minimizes dust clouds and allergens during disposal.

In terms of filtration, the vacuum cleaner incorporates a highly-effective HEPA filter that captures 99.97% of particles as small as 0.3 microns. This makes it an excellent choice for allergy sufferers or households with pets, as it significantly reduces the number of allergens circulating in the air.

The AEG C 7 18 41 I is not just efficient in cleaning; it is also equipped with various settings and tools to assist in specialized cleaning tasks. With a range of attachments including crevice tools, upholstery brushes, and dusting brushes, users can tackle a wide array of cleaning challenges effectively.

Overall, the AEG C 7 18 41 I exemplifies innovation and practicality, making it a valuable addition to any cleaning arsenal. Its combination of powerful suction, lightweight design, large capacity, and advanced filtration ensures that users can maintain a clean and healthy living environment with ease.
Top Page Image Contents