Door reversibility

Unplug the freezer before performing the following operations:

Remove the ventilation grill (D).

Remove the lower hinge (E) by loosening the two fastening screws.

	Fig. 2
E	F
E
F
	F
D
F
PR185

Remove the door by sliding it out of the upper pin (A- Fig. 3).

Unscrew the pin and the washer (A+B-Fig. 3) and reﬁt them on the opposite side.

Reﬁt the door.

Reﬁt the lower hinge (E-Fig. 2) on the opposite side by means of the two screws that have been previously removed.

Remove the plug (F) from the ventilation grill (D) and replace it on the opposite side.

Reﬁt the ventilation grill.

Remove the handle and reﬁt it on the opposite side (Fig. 4).

Unscrew the handle. Reﬁt it on the opposite side after having pierced the plugs with a punch. Cover the holes left open with the plugs contained in the documentation pack.

If, after having reversed the door, it is not in line with the unit, the top hinge can be adjusted.

To do this, use a 10 mm spanner as shown in Figure 3; slacken the nut, align the door by pushing it to the left or right, then re-tighten the nut.

Attention

After having reversed the opening direction of the door check that all the screws are properly tightened and that the magnetic seal adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not ﬁt perfectly to the cabinet. In that case, wait for the natural ﬁtting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.

Fig. 3

D427

Fig. 4

PR228

2073-4 GS, 204-4 GS specifications

The AEG 204-4 GS and 2073-4 GS are advanced industrial electrical motors that exemplify cutting-edge technology and robust design. Known for their efficiency and reliability in various applications, these motors cater to diverse industries, including manufacturing, automation, and more.

One of the primary features of both models is their powerful performance. The AEG 204-4 GS is designed with a high output, ensuring consistent torque and speed across a range of operational settings. Meanwhile, the 2073-4 GS takes performance a step further, providing enhanced output power and improved efficiency, making it suitable for even the most demanding tasks.

In terms of design, both motors are built with durable materials that ensure longevity and resistance to wear and tear. The robust construction allows these motors to operate in harsh conditions without compromising performance. They also feature advanced cooling systems that prevent overheating, which further enhances their reliability.

Technologically, these motors incorporate state-of-the-art control systems that allow for precise management of speed and torque. This adaptability is crucial in applications where variable load conditions are common. Additionally, both models are equipped with integrated sensors that provide real-time data on operational performance, allowing for timely maintenance and troubleshooting.

Energy efficiency is a hallmark of the AEG 204-4 GS and 2073-4 GS models. Designed to meet stringent energy standards, these motors help reduce operational costs while minimizing environmental impact. Their efficient design contributes to lower energy consumption, which is critical in today’s eco-conscious market.

Moreover, ease of installation and maintenance is another highlight of these motors. They come with user-friendly features that reduce downtime during setup and maintenance, allowing businesses to maximize productivity.

Overall, the AEG 204-4 GS and 2073-4 GS are exemplary models in the realm of industrial motors, blending power, efficiency, and reliability. Their advanced features cater to the evolving demands of industries, making them a valuable addition to any operational setup. With a focus on innovation and performance, AEG continues to set the standard in electric motor technology.