LT-800 Operating Instructions
1
2
Power Unit On
Turn power on by pressing the power button.
Select a Channel
Select the transmit channel by pressing the channel select UP and DOWN buttons. See Channel Selection on page 14 for more information.
Channel Select UP and DOWN buttons
3Lock on Channel
Once you determine your transmit channel, you can lock the transmitter on that channel. To lock on a channel hold the Channel Select “Up” button for 3 seconds until the padlock icon appears on the display. To unlock, repeat this process and the padlock icon will disappear.
Lock icon
4Test Tone (if necessary)
To broadcast a test tone, press the test tone button. This helps to test receivers when no audio source is available.
Press Test Tone button here
10