Axis Communications T8414 manual Power over Ethernet, PoE Setup, Power Level, PoE Measurement

AXIS T8414 User’s Guide Page 13

Power over Ethernet

AXIS T8414 delivers PoE to Axis network video products with PoE support either from the unit's battery or from PoE by-pass. Tap this icon to turn on and off Power over Ethernet.

PoE Setup

To enable that PoE starts as soon the AXIS T8414 itself is powered up, select ON from the drop-down list. To limit the amount of time that PoE will be enabled when there is no camera connected, select the number of seconds from the PoE auto- shutdown after drop-down list.

Power Level

The output Power Consumption Level range can be set according to different needs. The options include <Very Low (~3W)>, <Low (3~5W)>, and Mid-High (6~25W+EXT 12V)>.

Note:

Please make sure the PoE function is set to Off before changing the Power Level setting.

PoE Measurement

The information includes voltage (V), current (I) and power consumption (P) of Power over Ethernet (PoE) which can be measured according to different Ethernet circumstances. Select from the drop-down list of <PoE Measurement> to fit your Ethernet condition and show the PoE Measurement information on the screen while using PoE.

ENGLISH