Axis Communications T8414 manual PoE Measurement Display, Enable PoE after Tester Bootup

Page 14

PoE Measurement Display

Select the desired combination of PoE Measurement information from the drop-down list, including Voltage (V), Current (I), and Power Consumption (P).

Enable PoE after Tester Bootup

To enable PoE while the Tester is booting up, please select <ON> from the drop-down list of <Enable PoE when booting>.

The Tester will provide power to the camera right after system startup.

PoE Auto-shutdown

Set the PoE auto-shutdown interval to 20 seconds, 40 seconds or 60 seconds. The setting will help save battery when there is no network camera or other device using the Tester as the PSE. A reminder will show 5 seconds before shutting down.

Tap <Enter/Save> to save all the settings and you will then automatically be directed to the Home Screen. Or tap <Return> to exit the setting page without saving settings.

AXIS T8414 User’s Guide