Axis Communications T8414 manual Battery, Unit connectors, LED indicators

Page 6 AXIS T8414 User’s Guide

Unit connectors

LAN/PoE OUT - RJ-45 Ethernet connector. Provides power to network cameras that are PoE enabled.

LAN/PSE IN - The Power bank provides 48 V DC power (External power bank not included). USB slot - Connect USB storage devices for data storage.

Micro SD slot - Insert a Micro SD card into the slot for data storage.

AV in - BNC connector for connecting an analog camera. Use a 75 ohm coaxial video cable.

CAT5 Cable tester - for testing and detecting wiring types. See Network cable test, on page 12 for instructions on testing wiring type.

Power Adapter - 12 V DC connector.

LED indicators

LED	Indication
Power	Power on indicator.
Data	Flashes when the AXIS T8414 is under operation
Charging	The LED will stay lit while the AXIS T8414’s battery is charging.

Battery

The AXIS T8414 is powered by a rechargeable Li-ion battery pack that takes approximately 4 hours to charge, and provides the AXIS T8414 with up to 3 hours run time.

To open the battery compartment cover, press it while sliding it outward, as shown in the figure below.

When installing the battery, make sure that it is oriented correctly as shown in the figure.

During the charging process, the charging indicator will be lit.