AXIS T8414 User’s Guide | Page 11 |
IP Camera
With AXIS T8414 Installation Display you can connect to a camera either through Connect or Device Search. If the IP address for the camera is not the default address expected, AXIS T8414 will change its own IP address to enable the connection. This may take a few seconds to complete.
Connect
Connect a network cable from the camera’s network port to one of LAN ports on the AXIS T8414. In the Main menu tap IP camera and Connect. Waiting will appear on the LCD display. When the camera is connected successfully, its image will display in the screen.
Device Search
Device search can be used to find all cameras in a local network or a single camera directly.
To find cameras on a local Network, connect AXIS
T8414 to the LAN with a network cable from one of the LAN ports. Tap the Device Search icon to show the list of cameras found. Tap the IP address of the target camera, enter its Username and Password if different from the default. Tap the Enter icon or the CONNECT button. The camera’s image will display in the screen.
Press the ESC key on the AXIS T8414 front panel to exit the viewing page.
Configure Root Password
This setting allows you to specify a password for the user ‘root’, which will be used to access all new or factory defaulted cameras. If an individual camera uses a different password, this should be directly entered when accessing that camera instead.
Use the keyboard to tap in the Username and Password and tap Set Password.
ENGLISH
