Cecilware F-150, F-60, F-100 service manual Filter Cartridge Directions, Operating Instructions

Page 2

FILTER CARTRIDGE DIRECTIONS:

To insert or replace the filter cartridge in the unit, follow these simple steps:

1)Remove cartridge support assembly by lifting straight up, and applying a twisting motion. Discard the used cartridge. Wipe machine down with a clean cloth.

DO NOT USE WATER OR OTHER CLEANING SOLUTIONS WHEN CLEANING THE FRY-SAVER®.

2)Place the cartridge support assembly over the center tube in the filter tank. Push down until the cartridge support rests on the bottom of the tank.

3)Place the pleated filter cartridge (pleats facing up) over the cartridge support. Push down on the outer rim until the cartridge rests on the support bead.

BE CAREFUL NOT TO DAMAGE PLEATS. Improper handling will crush them.

NOTE: Each filter cartridge can be used to filter up to 1,000 pounds of oil before a new cartridge must be used. This equates to the cartridge being entirely covered with foreign matter.

It is recommended that you only remove and re-insert the cartridge when it needs to be replaced. By continuously removing and re-inserting the cartridge, you will lessen its efficiency by breaking the seal formed around the cartridge diameter. This allows for oil and particles to flow into the filtered oil and re- contaminate the oil.

OPERATING INSTRUCTIONS

Before operating the filter, check the control lever and heater switch to see that they are in the "OFF" position. The drain valve should be in the “CLOSED” position too. The filter cartridge should be inserted as well (SEE FILTER CARTRIDGE DIRECTIONS).

NOTE: The FRY-SAVER® is equipped with a circuit breaker to protect against electric overload or short- circuiting. If the unit is plugged in and does not operate, simply push the circuit breaker button located on the face of the control panel and hold in for a few seconds. If the unit still does not operate, unplug and call either a service technician or our office at 1-800-935-2211 or 718-932-1414. DO NOT CONTINUE TO PUSH THE BUTTON! THIS WILL HARM THE MOTOR.

1)Turn off the fryer. Wait for the temperature of the oil to cool down to approximately 250° F. If you are using solid shortening, see below.

2)Plug the FRY-SAVER® into the correct service outlet.

The FRY-SAVER® is equipped with an additional "pre-heat" feature for when the cooking oil is solidified or thick.

A)Pre-heat the unit by turning the heater switch to "ON" and allow the unit to heat for approximately 15 minutes. You will know the unit is ready because suction is felt at the nozzle when the control switch is turned to "FILL."

B)When the machine is pre-heated, turn the heater switch to "OFF" and proceed with filtering.

Page 2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents FRY-SAVER Oil Filtration System Filter Cartridge Directions Operating InstructionsFRY-SAVER Filter Cartridges Two Ways To Extend The Life Of The CartridgeGurgling Noise oil is filling from Trouble Cause Solution FRY-SAVER does not startFRY-SAVER will not fill Under the cartridge instead of overPage FRY-SAVER by Cecilware Spare Parts Price List Cecilware Blickman Description List Price20080 Quick Tips

F-150, F-100, F-60 specifications

Cecilware is a prominent name in the commercial foodservice industry, known for its high-quality equipment designed to meet the diverse needs of businesses. Among its notable products are the Cecilware F-150, F-100, and F-60 models, which are all exceptional offerings in the realm of coffee brewers and warmers.

The Cecilware F-150 is a highly efficient coffee brewer designed for high-volume establishments. One of its standout features is its ability to brew up to 60 cups of coffee per hour, making it ideal for busy cafes, restaurants, and convenience stores. This model incorporates a user-friendly digital control system that allows operators to adjust brew times and water temperature for optimal flavor extraction. Additionally, its stainless steel construction ensures durability and easy maintenance, while the built-in water filter helps to improve the taste and quality of the coffee brewed.

In comparison, the Cecilware F-100 offers similar features but with a slightly lower brewing capacity. It can brew up to 50 cups of coffee per hour and is equipped with an automatic control system for consistent performance. The F-100 is designed with ease of use in mind, featuring an intuitive interface. The alternative brewing options with the F-100 allow businesses to customize their brewing processes to suit different types of coffee. Its compact design means it can fit easily into tighter spaces, making it a versatile choice for smaller establishments.

The Cecilware F-60 model takes a different approach by focusing on simplicity and convenience. It is a single-brew coffee maker that allows users to brew smaller batches while maintaining excellent quality. The F-60 is perfect for coffee shops that want to offer specialty drinks without the need for high-volume brewing. Its quick heat-up time and efficient brewing cycle make it a popular choice for establishments where fresh coffee is in constant demand. The single-serve capability ensures that each cup is freshly brewed, providing a premium taste that coffee aficionados appreciate.

All three models incorporate advanced brewing technologies, ensuring consistent results and maximum flavor extraction. They are designed with a focus on energy efficiency and reliability, making them excellent investments for any business looking to enhance its coffee service. The combination of durability, functionality, and innovative features across these models showcases why Cecilware remains a trusted name in commercial coffee equipment. Whether for high-volume brewing or specialty coffee creations, Cecilware’s F-150, F-100, and F-60 models cater to the needs of today’s diverse foodservice environments.
Top Page Image Contents