Cecilware BC120 Coffee Brewing Instructions, Checking Brew Cycle Outputs, To Start a Brew Cycle

Page 4

INITIAL PRIMING – Filling of Tank

The BC Brewers are shipped with the Thermostat in the OFF position. Do not turn Thermostat to the ON position until the Brewer has been fully primed.

a.Turn water supply on and check for leaks at the water inlet connections. Tighten compression fitting if necessary.

b.Turn on power to the Brewer. The Brewer will automatically start filling. After 6 minutes the filling cycle will stop and the thermostat should be turned clockwise to the full ON position. Allow approximately 20 minutes for the brewer to reach full brewing temperature (197'-203').

When the GREEN READY LIGHT comes ON the brewer is ready to brew the next batch of coffee.

NOTE: Before proceeding further, make sure the sample Filter pack has been removed from the funnel.

CHECKING BREW CYCLE OUTPUTS.

The BC-Series brewers are factory preset to deliver the proper amount of brewing water for the 12 cup, 24 cup and 36 cup brew cycles. Nevertheless, it is a good practice to check the output levels prior to brewing the first batch of coffee.

BC1 and BC2: Full 36 cups (3 decanters) per brew cycle with a 20% by-pass.

BC120 and BC240: Selectively 12 cups (1 decanter) or 24 cups (2 decanters) per brew cycle. No by-Pass.

BC301 and BC302: Selectively 12, 24 and 36 cups per brew cycle with a 20% by-pass for the 36 cup cycle only.

TO START A BREW CYCLE:

Turn Warmer Switch to the ON position. The Warmer Switches also double as CYCLE STOP switches. With Funnel and Carrier in place activate GREEN BREW switch.

On BC120, BC240, BC301 and BC302 brewers first activate brew switches marked 12 cups and then check output. Do the same with the 24 cup brew switch and the 36 cup brew switch for the BC301 and BC302 units.

NOTE: 12 cups equal 1 full decanter.

If necessary adjust the timer(s) to increase or decrease output levels. See Timer adjustments.

COFFEE BREWING INSTRUCTIONS

Place filter paper into brew basket and add finely ground coffee as per chart below:

 

MODEL#

 

 

CUPS BREWED

 

 

RECOMMENDED COFFEE

 

 

TOTAL BREW TIME

 

 

 

 

 

 

 

 

 

 

 

 

AMOUNT

 

 

 

 

 

 

 

Single

BC120

12

/ 24 Cups

 

 

2

oz./ 4 oz.

 

3.0

/ 4.5 Minutes

Single

BC240

12

/ 24

Cups

 

 

2 oz./ 4 oz.

 

3.0

/ 4.5

Minutes

Single

BC1

 

 

36

Cups

 

 

 

6 oz.

 

 

 

6.0

Minutes

Twin

BC2

 

2 x 36

Cups

 

 

 

2 x 6 oz.

 

 

 

6.0

Minutes

Single

BC301

12 / 24

/ 36

Cups

 

 

2 oz./ 4 oz./ 6 oz.

 

3.0 / 4.5

/ 6.0

Minutes

Twin

BC302

2 x (12 / 24 / 36 Cups)

 

2x (2 oz./ 4 oz./ 6 oz.)

 

2x (3.0 / 4.5 / 6.0 Minutes)

Insert brew funnel back into brewer and position empty carriers under brew funnels. With Warmer Switches on (lit), depress Green Brew Switches. Total brew time will vary according to cups selected. After funnel stops dripping, remove and empty funnels.

Warning: Remove Brew funnel ONLY after it has stopped dripping.

4

Image 4
Contents Wiring Diagram Brew CENTER, Coffee Brewing EquipmentSpecifications Electrical Specifications Mechanical SpecificationsFast START-UP Procedure Model no BC1Installation and Operating Instructions Coffee Brewing Instructions Checking Brew Cycle OutputsTo Start a Brew Cycle BC1Adjustments BY-PASS Flow Valve AdjustmentsAdjustment Screw Dual Bypass ValveTimer Adjustment Procedure Thermostat AdjustmentWater Flow Rate Adjustment BCI, BC2Special Components Test Solid State Water Level Control BoardTroubleshooting Guide Problem Probable Cause RemedyCleaning SanitizingTo Prevent Corrosion Damage Draining of Water TankBC302 Front Open Parts IdentificationHI-LIMIT Rubber GasketSpray Head Base ASS’Y Ruber WasherBottom Cabin Open View Bottom Cabin Parts Identification BC2-ITCarrier ASS’Y DescriptionNG47A Faucet & Shank ASS’Y60Hz WhiteBC-120E Dual Brewtime BC-240E Dual Brewtime Brew Circuit BC-2E Single Brew Time Probe

BC240, BC120, BC1, BC2, BC301 specifications

Cecilware offers a diverse range of commercial coffee brewers, notably the BC302, BC2, BC301, BC120, and BC240 models. Each one caters to different brewing needs while ensuring high-quality coffee output for restaurants, cafes, and other food service establishments.

The Cecilware BC302 is a high-capacity brewer with dual brewing capability, allowing for the simultaneous preparation of two 12-cup pots of coffee. This model features a user-friendly digital control panel, enabling precise temperature control and brew timing, which are critical for achieving optimal coffee extraction. Its stainless steel construction ensures durability and easy maintenance, while its large water reservoirs provide convenience during peak service times.

The BC2 model is perfect for those who require a straightforward brewing solution. With a single brew head, the BC2 is designed for smaller establishments but does not compromise on quality. This model includes adjustable brew levels and a simple on/off function, making it ideal for businesses that prefer an uncomplicated brewing process without sacrificing flavor.

The Cecilware BC301 stands out for its energy-efficient design. This model is equipped with a powerful brewing mechanism that heats water quickly, which not only saves energy but also reduces wait times for customers. The BC301 features a sleek design that complements any countertop, and its easy-access components simplify cleaning and maintenance.

For those seeking versatility, the BC120 model is an excellent choice. This brewer offers an array of customizable brew settings, allowing businesses to experiment with different coffee styles. Its compact size makes it suitable for limited spaces, while its robust construction guarantees longevity and reliability.

Lastly, the BC240 brewer is tailored for moderate to high-volume establishments. It is equipped with advanced brewing technology that minimizes brewing time while maintaining top-notch flavor profiles. The BC240’s intuitive controls and programmable features make it adaptable for both busy morning rushes and quieter afternoon shifts.

In summary, the Cecilware BC series offers solutions tailored to diverse brewing needs. With a focus on durability, ease of use, and energy efficiency, these brewing systems provide excellent value for anyone seeking to enhance their coffee service while ensuring high-quality beverages for customers. Whether one is looking for a compact unit or a high-capacity brewer, the BC302, BC2, BC301, BC120, and BC240 models deliver consistent results to meet the demands of any coffee business.