Cecilware BC302, BC301, BC120, BC240 specifications Installation and Operating Instructions

Page 3

INSTALLATION AND OPERATING INSTRUCTIONS

Warranty is void if the Brewer is connected to any Voltage other than the Voltage specified on the data label of the Brewer.

UNPACKING AND INSPECTION

Carefully unpack the Brewer by cutting the straps and lifting the carton off the Brewer.

ASSEMBLY AND SET-UP

The Brewer is shipped complete with:

DESCRIPTION

BC1, 301, 120, 240

BC2, 302

Adjustable legs

4

4

Carriers complete with Faucets and Covers

1

2

Funnels with sample Filter pack

1

2

Remove carriers from Brewer, one has the four (4) legs packed inside. Install legs by tilting Brewer on its back and screwing the legs into the threaded leg supports on bottom.

WATER HOOK UP

The National Sanitation Foundation (NSF) requires the following for NSF approved installation:

1.A quick disconnect water connection or enough extra coiled tubing (at least 2x the depth of the unit) so that the Brewer can be moved for cleaning underneath.

2.An approved flow-back prevention device such as a double check valve to be installed between Brewer and water supply.

WATER CONNECTION

The Brewer comes equipped with a ¼ inch compression water inlet fitting located in the back. Use a ¼ inch copper tubing to connect the Brewer to a cold water supply. Water pressure should be: 20 PSI min. to 90 PSI max. An external shut-off valve and a water filtering system with a charcoal filter are highly recommended.

Turn water supply on and check for leaks at the water inlet connections, tighten compression fitting if necessary.

ELECTRICAL CONNECTIONS

A terminal block inside the base compartment is provided for electrical connections. Opening for field conduit connections are provided in the bottom and the back of the base.

To access the Terminal Block, loosen the 2 screws on the side of the base cover. Disengage base cover from rear panel by lifting base cover up and lifting back towards rear panel.

Power Cord CE202 – Optional ?

 

RECOMMENDED WIRING SIZES

 

Model No.

Single (1) Phase

Single: BC1, BC301, BC120, BC240

12 AWG

Twin: BC2, BC302

10 AWG

Note:

1.Neutral (N) and Ground Wires to be 14 AWG Minimum.

2.Field wiring must be suitable for 75º C.

3.Use Copper wire only for all power supply connections.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Brew CENTER, Coffee Brewing Equipment Wiring DiagramModel no BC1 Specifications Electrical SpecificationsMechanical Specifications Fast START-UP ProcedureInstallation and Operating Instructions BC1 Coffee Brewing InstructionsChecking Brew Cycle Outputs To Start a Brew CycleDual Bypass Valve AdjustmentsBY-PASS Flow Valve Adjustments Adjustment ScrewBCI, BC2 Timer Adjustment ProcedureThermostat Adjustment Water Flow Rate AdjustmentSolid State Water Level Control Board Special Components TestProblem Probable Cause Remedy Troubleshooting GuideDraining of Water Tank CleaningSanitizing To Prevent Corrosion DamageParts Identification BC302 Front OpenRuber Washer HI-LIMITRubber Gasket Spray Head Base ASS’YBC2-IT Bottom Cabin Open View Bottom Cabin Parts IdentificationFaucet & Shank ASS’Y Carrier ASS’YDescription NG47AWhite 60HzBC-120E Dual Brewtime BC-240E Dual Brewtime Brew Circuit BC-2E Single Brew Time Probe

BC240, BC120, BC1, BC2, BC301 specifications

Cecilware offers a diverse range of commercial coffee brewers, notably the BC302, BC2, BC301, BC120, and BC240 models. Each one caters to different brewing needs while ensuring high-quality coffee output for restaurants, cafes, and other food service establishments.

The Cecilware BC302 is a high-capacity brewer with dual brewing capability, allowing for the simultaneous preparation of two 12-cup pots of coffee. This model features a user-friendly digital control panel, enabling precise temperature control and brew timing, which are critical for achieving optimal coffee extraction. Its stainless steel construction ensures durability and easy maintenance, while its large water reservoirs provide convenience during peak service times.

The BC2 model is perfect for those who require a straightforward brewing solution. With a single brew head, the BC2 is designed for smaller establishments but does not compromise on quality. This model includes adjustable brew levels and a simple on/off function, making it ideal for businesses that prefer an uncomplicated brewing process without sacrificing flavor.

The Cecilware BC301 stands out for its energy-efficient design. This model is equipped with a powerful brewing mechanism that heats water quickly, which not only saves energy but also reduces wait times for customers. The BC301 features a sleek design that complements any countertop, and its easy-access components simplify cleaning and maintenance.

For those seeking versatility, the BC120 model is an excellent choice. This brewer offers an array of customizable brew settings, allowing businesses to experiment with different coffee styles. Its compact size makes it suitable for limited spaces, while its robust construction guarantees longevity and reliability.

Lastly, the BC240 brewer is tailored for moderate to high-volume establishments. It is equipped with advanced brewing technology that minimizes brewing time while maintaining top-notch flavor profiles. The BC240’s intuitive controls and programmable features make it adaptable for both busy morning rushes and quieter afternoon shifts.

In summary, the Cecilware BC series offers solutions tailored to diverse brewing needs. With a focus on durability, ease of use, and energy efficiency, these brewing systems provide excellent value for anyone seeking to enhance their coffee service while ensuring high-quality beverages for customers. Whether one is looking for a compact unit or a high-capacity brewer, the BC302, BC2, BC301, BC120, and BC240 models deliver consistent results to meet the demands of any coffee business.
Top Page Image Contents