Cecilware FTC-10, FTC-5 manual Brewing Instructions, TEA Brewing Recommended Measurements, Model #

Page 5

BREWING INSTRUCTIONS:

Place empty CARRIER under Funnel. Make sure openings in cover line up properly with funnel outlet and dilution tube.

TEA BAGS - Place correct number of tea bag(s) directly into brew funnel.

Replace funnel into brew head of unit and push brew switch when GREEN READY LIGHT comes on.

GROUND TEA LEAVES - Place paper filter into brew funnel and add proper amount of fresh ground tea leaves into filter. Replace funnel into brew head of unit and push brew switch when GREEN READY LIGHT comes on. See chart

below for the recommended ounces of ground tea leaves.

TEA BREWING RECOMMENDED MEASUREMENTS

MODEL #

 

SIZE & QUANTITY OF TEA BAGS

GROUND TEA LEAVES - OUNCE

FTC-3

 

(1) 3 Gallon Bag

3-4 Ounces

FTC-5

(2)

3 Gallon Bags or

(6)

1 Gallon Bags

4-6 Ounces

FTC-10

(3)

3 Gallon Bags or

(9)

1 Gallon Bags

9 Ounces

Allow approximately 10 minutes for a complete brew cycle. DO NOT remove brew funnel until it has stopped dripping. Serve Fresh Brewed Tea from dispensing faucet into tea glass over ice.

ADJUSTMENTS TO BE PERFORMED BY QUALIFIED SERVICE PERSONNEL ONLY. CAUTION: BREWERS SHOULD BE UNPLUGGED FROM ELECTRICAL OUTLETS

BREW VOLUME and STRENGTH ADJUSTMENTS:

The water flow rate coming from the hot water tank is constant/fixed at 0.75 gal/min.

Increasing or decreasing the amount of hot water dispensed from tank can also be used to adjust the strength of the tea. Longer water flows – More water – Weaker tea; Less water flows – Less water – Stronger tea.

TIMER ADJUSTMENTS FTC-3, FTC-5:

Remove top cover and Locate Timer on the left side.

To brew MORE tea: Turn timer knob one increment CLOCKWISE.

To brew LESS tea: Turn the timer knob one increment COUNTERCLOCKWISE.

Go through a COMPLETE brew cycle. Repeat if necessary.

“TEACH ME” TIMER L576A ADJUSTMENTS – FTC 10:

This timer can be programmed from the brew button to dispense different volume of hot water .

PRIMING:

1.

MAKE SURE HEATER SWITCH IS OFF.

 

2.

PUSH & HOLD DOWN BREW BUTTON WHILE SWITCHING POWER ON.

 

3.

RELEASE BREW BUTTON.

 

4.

PUSH BREW BUTTON AGAIN & WAIT FOR WATER TO START FLOWING OUT OF SPRAY HEAD.

 

 

PUT TIMER INTO PROGRAM MODE:

1. START WITH POWER OFF.

 

2.

WHILE HOLDING DOWN BREW BUTTON, TURN POWER ON.

 

3.

RELEASE DISPENSE BUTTON.

PROGRAM THE BREW BUTTON:

4. PUSH BREW BUTTON TO START TIME [porduct begins dispensing].

 

5.

PUSH BREW BUTTON AGAIN TO STOP TIME [about 2“ from top of dispenser for 10 gal.]

 

 

[product stops dispensing] .

 

6.

BREW BUTTON CAN BE JOGGED TO TOP OFF CONTAINER.

PUT TIMER INTO RUN MODE:

7.

TURN POWER OFF AND ON AGAIN [this locks in total dispense time].

NORMAL OPERATION: TURN POWER ON, TURN HEATER SWITCH ON, WAIT 20 MINUTES UNTIL READY LIGHT COMES ON. UNIT IS READY TO BREW.

5

Image 5
Contents FTC 3, 5, 10 Gallon ContentsElectrical Specifications Dimensional SpecificationsModel no Height HAccessories Used with the Machine Unpacking and AssemblyWater Inlet Connection FTC-3 FTC-5Priming Procedure Location of Toggle Heater SwitchTotal Volume Output Check Initial Priming Filling of TankModel # Brewing InstructionsTEA Brewing Recommended Measurements Description FIG. DE S CR I PTI onFTC-10 Funnel Assy #Q183Q Thermostat Adjustment Faucet Cleaning and Sanitizing InstructionsContainer Series Pinch Tube Faucet Press RED Power Switch Page FTC-3 DescriptionPage Iced TEA Dispenser SU-3P, SU-5P TWO Piece Tank AssemblyIced TEA Dispenser S3C, S5C, S5W, S10C ONE Piece

FTC-10, FTC-5 specifications

The Cecilware FTC-10 and FTC-5 are two models of highly-regarded commercial coffee machines that cater to the needs of café owners, restaurants, and other businesses looking to serve high-quality coffee efficiently. Both models exemplify Cecilware’s commitment to innovation and quality, offering unique features and technologies that enhance brewing performance while ensuring ease of use and maintenance.

The FTC-10 is a freestanding, high-capacity coffee brewer designed for high-demand environments. One of its standout features is its dual-container design, allowing it to brew two different types of coffee simultaneously. This is particularly beneficial for establishments that offer a variety of blends or decaf options. With its stainless steel construction, the FTC-10 is not only durable but also maintains a modern aesthetic that fits well in any setting.

On the other hand, the FTC-5 is slightly more compact, making it an excellent choice for establishments with limited counter space. Offering similar brewing capabilities, the FTC-5 is designed for smaller batches without compromising on quality. Both machines are equipped with advanced technology, such as programmable controls that enable users to customize brewing times and temperatures, ensuring each batch is tailored to meet specific flavor profiles.

Both models utilize a unique brewing process that incorporates pre-infusion technology. This feature allows the coffee grounds to bloom before the actual brewing begins, resulting in enhanced extraction and richer flavor. Additionally, the machines come with automatic shut-off capabilities, promoting energy conservation when not in use.

In terms of maintenance, both the FTC-10 and FTC-5 have been designed with user-friendliness in mind. Their removable drip trays and easy-to-access components simplify cleaning, ensuring that operators can maintain optimal hygiene standards with minimal effort.

The machines also boast heated coffee towers, guaranteeing that the brewed coffee remains at the ideal serving temperature. This is essential in maintaining flavor and freshness throughout busy service periods.

Overall, the Cecilware FTC-10 and FTC-5 represent a perfect blend of functionality, technology, and style. Both models cater to the needs of various commercial settings, making them reliable choices for those looking to elevate their coffee service without compromising on quality or efficiency. Whether you opt for the higher capacity of the FTC-10 or the compact design of the FTC-5, you can be assured that you are investing in a machine engineered to deliver exceptional performance and satisfaction.