Bosch Appliances PCH 615 DAU Connection, Converting the cooktop from Nat. Gas to Propane Gas

Page 8

Installation continued

Connection

Electrical:

An electrical 10 amp socket needs to be within 1 m of the hotplate to allow electrical connection. The socket must remain accessible after installation of the appli- ance.

Important note:

This appliance is connected to the mains (240 VAC) by means of the connecting lead which must be fixed to the kitchen unit to prevent it from coming into con- tact with hot parts of the hob (or an oven installed underneath).. When making this connection make sure that the lead cannot come into contact with hot parts of the hob.

Important: This appliance must be earthed.

Gas:

During the planning stage, consider the position of supply connections.

The hob must be connected to the gas supply with upstream connection of an isolation valve in accord- ance with the respectively valid regulations. We rec- ommend that the isolation valve be fitted prior to the cooktop to enable isolation of cooktop from gas sup- ply. The valve must be easily accessible at all times.

To find out the factory set gas type, see bottom of cooktop next to gas connection.

Remove plastic cap from gas supply line prior to in- stallation.

Fit regulator (N.G.) or Propane fitting (Propane) di- rectly to the R1/2” connection as per Fig. 4 and Fig. 5. Direction of gas flow is indicated on the rear of the regulator.

For position of the inlet connection refer Fig.1.

Natural gas connection

Propane gas connection

 

 

 

 

Converting the cooktop from Nat. Gas to Propane Gas

It should be expressly noted that we cannot accept any liability for direct or indirect damage caused by wrong connection or improper installation. When being repaired, the appliance must always be disconnected from the mains supply; if required, notify our customer service.

To change injectors

Request change-over injectors from our customer serv- ice department (refer injector chart below for sizes).

 

Natural Gas

Propane Gas

Burner

Injector

Hourly Gas

Injector

Hourly Gas

 

size(mm)

Consumption

size (mm) Consumption

 

(mm)

(MJ)

(mm)

(MJ)

Left Front (wok)

1.70

14.0

0.97

13.25

Left Rear

1.20

6.5

0.67

6.25

Right Front

0.90

4.0

0.5

3.25

Right Rear

1.20

6.5

0.67

6.25

Before conversion the cooktop must be disconnected from the electricity and gas valves must be turned to the OFF position.

1Remove the trivets, burner caps and burner heads. Refer Fig. 6

2Change the injectors using a 7-mm socket wrench and be sure to tighten them down properly so that they are fully airtight. Refer Fig. 7.

3Re-assemble the burner component parts in reverse order.

NOTE: it is not necessary to adjust the primary air control on these burners.

45

67

8

9

Image 8
Contents Bosch Model No’s PCH 612 DAUSwitch Blue wire Brown wire Terminal Ignition module Wiring diagramService agent Service ContentsSafety considerations For your safety What to do if you smell gasCleaning Do’sWire coffee support User instructionsBoiling burners Wok trivetInstallation Preparing to installOperating instructions Burner locationsClearances Minimum flame adjustmentInstallation procedure Connection Converting the cooktop from Nat. Gas to Propane GasElectrical Gas

PCH 615 DAU, PCH 612 DAU, PCH 615 FAU specifications

Bosch, a renowned brand in the home appliance industry, consistently delivers high-quality products designed to enhance the comfort and efficiency of modern living. Among their impressive range, the Bosch PCH 612 DAU, PCH 615 DAU, and PCH 615 FAU stand out with their innovative design, advanced technologies, and user-friendly features, making them ideal choices for contemporary kitchens.

The Bosch PCH 612 DAU is a built-in gas hob that is distinguished by its sleek design and high performance. One of its main features is the inclusion of four gas burner zones, which provide flexibility for different cooking styles. The burners are equipped with a flame failure safety device, ensuring that the gas supply is cut off in case the flame goes out, enhancing safety during cooking. The hob's tempered glass surface not only offers a modern aesthetic but also makes it easy to clean.

Moving to the Bosch PCH 615 DAU, this model further elevates the cooking experience with five gas burners, including a high-efficiency burner that delivers rapid heat for quicker meal preparation. The PCH 615 DAU is designed with control knobs positioned at the front, allowing for easy access while cooking. The pan supports are made of cast iron, which not only add stability but also provide excellent heat retention. The model also boasts a unique auto-ignition feature, making it convenient to use with just one hand.

The Bosch PCH 615 FAU is a cutting-edge induction hob that revolutionizes the way we cook. Featuring four heating zones with a powerful boost function, the PCH 615 FAU reduces cooking time significantly. The induction technology provides precise control over cooking temperatures, allowing for perfect results every time. Safety features are prominent in this model, including a child lock and automatic switch-off, ensuring peace of mind for families. The hob's sleek black glass finish complements any kitchen decor while making maintenance a breeze.

All three models embody Bosch’s commitment to sustainability and energy efficiency. They are designed to minimize energy consumption without compromising performance. The intuitive control interfaces across these hobs ensure that users can easily manage their cooking environments.

In summary, the Bosch PCH 612 DAU, PCH 615 DAU, and PCH 615 FAU exemplify innovation and functionality in modern kitchen appliances. With their advanced features, safety technologies, and stylish designs, these hobs cater to both novice and experienced cooks alike, making them valuable additions to any home. Whether you prefer gas or induction cooking, Bosch provides exceptional options tailored to meet diverse culinary needs.