3.Press red colour key to pop up the Edit Satellite window. Press PR+, PR- keys to
move cursor up or down.
Name: User numeric keys to change the name of the satellite, please refer to the Edit Channel Name.
Longitude: You can press 
keys to
switch between east longitude and west longitude. After pressing OK key, you can use numeric keys to edit the longitude, press EXIT key or the PR+, PR- keys to exit editing mode. The range of the longitude is from 1to 180 degree. If beyond this range, system will inform you "out of range" when you press yellow colour key on the RCU.
After setting, press yellow colour key to save and exit, while press blue colour key to exit without saving.
4.Press green colour key to pop up the Add Satellite window. Since the same operation
as the above Edit Satellite window, here we don't explain any more.
5. Press blue colour key to pop up the dialogue "Are you sure to delete?". Select Yes button and press OK key to delete the selected satellite. You can cancel this operation by pressing OK key at the NO button.