Fortec FS-4000v2 manual Antenna Setup Part a Fixed, Part B Moter

2.3 Antenna Setup

Part A: Fixed

Suppose that you have selected Fixed Antenna in the Antenna Connection window.

1.Satellite: All selected satellites in the satellite list are displayed in this item.

Press keys to select the satellite in

circle. Or press OK key to pop up the drop- down list, then select the desired satellite in the list and press OK key to confirm.

2.LNB Freq, Transponder, DiSEqC1.0, DiSEqC1.1: The same operation as the above.

3.22K, 0/12V, Toneburst, LNB Power: You

can press keys to select in circle.

Part B: Moter

Suppose that you have selected Moter Antenna in the Antenna Connection window.

1.LNB Type: Select the proper LNB type.

2.Motor Type: Select between DiSEqC1.2 and USALS. If you select DiSEqC1.2, the

following Local Longitude and Local Latitude items will turn grey.

3.Delete All: Press OK key to pop up the

dialogue "Are you sure to clear set satellite position of this tuner?". Press OK key at the Yes button to clear all the memories about the position of the satellites that has connected to the current turner.