Bosch Appliances SHU 9950, SHV 4300, SHV 6800 Selecting a Wash Cycle, Various Model Types, Shu/Shi

SELECTING A WASH CYCLE

Selecting a Wash Cycle

The dishwasher will wash and dry the contents based on cycle selection made. Refer to Tables 3, 4 and 5: Wash Cycle Selection Chart to select the most ap- propriate cycle for the wash load.

Follow these steps to select a cycle and start the dishwasher:

Note: All indicator lights will remain illuminated until the on/ off switch is pressed or the door is opened.

Various Model Types

SHU/SHI Models:

1.	Close the dishwasher door, making sure
	that door latches are closed.
2.	Press the on/off switch.
3.	Select the button for the program
	desired.*
4.	The dishwasher will start automatically

On / Off

Power

Figure 24

SHU/SHI

CycleCountdown	Power			Delicate/			Refill
88	Scrub	Scrub	Regular	Econo	Quick	Rinse &	Rinse
	Plus	Wash	Wash		Wash	Hold	Agent

Delay	Top
Start	Rack	Cancel
Hours	Only	Drain

and continue to the end of the selected

cycle.

SHU 9950

5.At the end of the cycle the dishwasher will stop and either the “Clean” light will become illuminated, the LED display will show“CL” or “0”, or the dishwasher will beep.

SHU 9910/9920/9950/ 8800 & 8810

Models & SHV Models:

1.Open dishwasher door.

2.Press the on/off switch.

On/Off INTEGRA Ltd.

Figure 25

SHU 9910/9920 & SHV Models

On

Off

Cancel Drain

3.Push the button once for the program desired.

4.Close door until it latches and the pro- gram will begin.

5.Same as #5 above.

Push the desired button TWO TIMES if another program button is lit up.

Figure 26

VARIOUS END OF

CYCLE INDICATORS

*Clean light illuminates

*CL or 0 is displayed on the LED.

*Cycle Completion Beeper sounds off

www.boschappliances.com ENGLISH - 19