FUNAI EWR10D5 owner manual Hints for Timer Recording, Priority of overlapped settings

Page 34

Recording

Timer Recording (cont’d)

Hints for Timer Recording

• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.

•If a recordable disc is not on the tray, the indicator flashes and Timer Recording cannot be performed. In some cases, the

indicator appears momentarily around the start point as the unit attempts to record. Please insert a recordable disc.

•When all the Timer Recording is completed, the indicator flashes.To play or eject the recorded disc, hit [POWER] first,

and then press [PLAYB] or [OPEN/CLOSE A].

•During Timer Recording or timer standby ( indicator is on the front display), any operations on the unit will not be avail-

able.To make these operations available, cancel the Timer Recording or timer standby first ( indicator disappears).

•To cancel the timer standby mode, hit [POWER].

• When the Start and the End time are the same, the length of the recording will be set for 24 hours.

• When the disc reaches at the end during the Timer Recording, the unit turns itself off.

•When the programmed Start and End time are earlier than the current time, the setting will not be accepted and be cleared for redoing.

•If the Start time is earlier and the End time is later than the current time, the recording will start right after you hit [POWER].

The priority of overlapped settings

This unit records the programs according to priority if the timer programmings are overlapped.The timer programming set previously has priority.

A Timer Recording of lower priority will be canceled, start from the middle or stop on the way. Check the overlapped timer programmings and change the priority if necessary.

A programming set previously has priority

When the starting time is same:

A program set previously (PROG. 1) has priority.

PROG. 1

PROG. 2

Actual

PROG. 1

PROG. 2

recording

 

 

The first 30 seconds (at the longest) will be cut off

When the recording time is partially overlapped:

PROG. 1 will start after PROG. 2 is complete to be recorded.

PROG. 1

PROG. 2

 

 

Actual

PROG. 2

PROG. 1

recording

 

 

The first 30 seconds (at the longest) will be cut off

When some programming have been made at the end time of the programming currently being recorded:

A program set previously (PROG. 2) has priority.

PROG. 1

 

 

PROG. 2

 

 

PROG. 3

 

 

Actual

PROG. 1

PROG. 2

recording

 

 

The first 30 seconds (at the longest) will be cut off

When the recording time is entirely overlapped:

PROG.1 will not be recorded.

PROG. 1

PROG. 2

Actual

PROG. 2

recording

 

Note for DVD recording

•When the recording time of two programs are overlapped, or the End time of a pro- gram and the Start time of another is the same, the first 30 seconds (at the longest) of the subsequent program will be cut off.

•If the cut-off portion comes up to one minute or more, this program will be dis- played with error number E40 in the timer programming list.

When the End time of the programming currently being recorded and the Start time of the subsequent program are same:

If PROG. 1 is a DVD recording program, the beginning of the PROG. 2 may be cut off.

PROG. 1

 

 

PROG. 2

 

 

Actual

PROG. 1

PROG. 2

recording

 

 

The first 30 seconds (at the longest) will be cut off.

32

Page 33 Page 35
Image 34
Page 33 Page 35
Contents From Cable Hit SetupCable Box or Satellite Box Back of this unitDate Select any blank line and hit EnterAfter all recordings, finalize your disc At the current dateMenu Others EspañolBefore you start PrecautionsLaser Safety Make your contribution to the environmentPrecautions cont’d Before youReverse engineering or disassembly is prohibited Supplied AccessoryDolby Digital Recording Others EspañolTable of contents Before FeaturesSymbol DescriptionFunctional overview Front PanelFunctional overview cont’d On-screen displays Indicates a disc type and a format modeDisplays Above approx feet 5m within Below approx feet 3m withinDisplays cont’d Front Panel Display Display messagePlug in the AC ConnectionsConnection to a TV After you have completed connectionsConnection to a cable box or satellite box You cannot record one channel while watching another channelConnection to an Audio System AudioGetting started Easy DVD recordingEasy DVD recording Cont’d Speed ChannelChannel setting Getting channels automaticallyChannel setting cont’d Adding/deleting channelsSelecting the TV stereo or SAP Setting the clock Auto Clock SettingSetting the clock cont’d Manual Clock SettingSetting the daylight saving time Selecting the TV aspect ratioInformation RecordingInformation on DVD recording Recordable discRestrictions on recording What is CPRM?Information on DVD recording cont’d Making discs playable in other DVD player FinalizeFormatting a disc Choosing the recording format of a blank discFormatting a disc cont’d Reformatting a discBasic recording Checking the recording picture and sound qualityTurn on the unit and load a recordable disc One-touch Timer RecordingWhen a DVD-RW disc is loaded Refer to Recording speed onTimer Recording Timer Recording cont’d Hints for Timer Recording Priority of overlapped settingsVideo Settings for an external sourceConnection to an external source Before you start Connections Getting startedUsing K / L, select Disc Protect OFF ON. Hit Enter Settings for an external source cont’dSetting a disc to protect Recording from an external sourceFinalizing the discs Your setting will be activated Using K / L, select Auto Finalize. Hit EnterUsing K / L, select on Hit Enter Finalizing the discs cont’dDisc Playback Information on DVD playbackBasic playback PlaybackPlaying back MP3 disc When selecting trackBasic playback cont’d Hit Playb to start play- backPlaying back discs using the disc menu Playing back discs using the title menuFast forward / Fast reverse Special playbackResume playback X1.5Step by step playback Special playback cont’dPause Slow forward / Slow reverse playbackMarker Setup ZoomSearch Using Skip H / GUsing Display Title/Chapter searchTrack search Search cont’dTime search Repeat playback Repeat/Random/Program playbackRandom playback Selecting a format of audio and video Switching subtitlesRepeat/Random/Program playback cont’d Program playbackSelecting a format of audio and video cont’d Switching audio soundtrackUsing K / L, select a desired audio channel. Hit Enter TOP Menu or MenuReducing block noise Switching camera anglesAngle will change each time you Editing Information on disc editingUsing K / L, select Title List. Hit Enter Editing discs in Video modeUsing K / L / / B, select a desired title. Hit Enter Deleting titlesUsing K / L, select Edit Title Name. Hit Enter Editing discs in Video mode cont’dUsing K / L, select Yes After this operation is com- pleted, hit Setup to exitUsing K / L, select Chapter Mark. Hit Enter Setting or clearing chapter markersUsing K / L, select a desired time. Hit Enter Using K / L, select Title Delete. Hit Enter Editing discs in VR mode OriginalUsing K / L, select Original. Hit Enter Original list will appearUsing K / L, select Protect. Hit Enter Editing discs in VR mode Original cont’dSetting titles to protect Confirm the indication OFF ON. Hit EnterConfirm the indication On OFF. Hit Enter Releasing titles from protectingKey icon will disappear from the title in the original list Playlist will appear Editing discs in VR mode PlaylistUsing K / L, select Playlist. Hit Enter Playlist menu will appearUsing K / L, select Delete. Hit Enter Editing discs in VR mode Playlist cont’dUsing K / L, select Scene Delete. Hit Enter Deleting parts of titlesTo enter a title name, follow Steps of Guide to edit title Name on thisYou cannot delete the first chapter of each title AddSetting pictures for thumbnails Picture for thumbnail will be setDividing a title Combining titles Using K / L, select Title Combining. Hit EnterUsing s / B, select Yes Hit Enter Two titles will be combined into a single titleAdding titles to a Playlist Deleting a PlaylistChanging the Setting menu Tour of the Setting menuUsing K / L, select a lan Guage. Hit Enter Language settingUsing K / L, select Playback. Hit Enter Audio Language Default OriginalLanguage setting cont’d Display settingUsing K / L, select a set Ting. Hit Enter Audio settingOSD Language Default English Set the language for OSD Screen Saver Default 10 minutesWhen playing back disc with copyright protec- tion Audio setting cont’dUsing K / L, select a setting. Hit Enter When playing back a DVD-RW disc recorded in VR modeFast Forward with Audio Default OFF Settings for Parental lock levelDynamic Range Control Default on Record the password in case you forget itSettings for Parental lock level cont’d Password has not been set yetSymptom Remedy Power TroubleshootingOthers Troubleshooting cont’d Symptom RemedyCause Solution OthersError message Cause Solution Language codeGlossary Specifications GeneralEspañol Fácil grabación de DVDOriginal y Playlist modo VR ¿Qué son títulos y capítulos?Puede editar lo siguiente de la lista de títulos ¿Qué significa Original o Playlist?Limited Warranty

EWR10D5 specifications

The FUNAI EWR10D5 is a versatile and compact multimedia device that caters to a variety of entertainment needs. Designed with user convenience in mind, it combines the functionalities of a DVD player and a VCR, making it a dual-purpose device for media enthusiasts.

One of the primary features of the EWR10D5 is its ability to play various formats. It supports standard DVD and CD formats, as well as the playback of CD-R/RW, giving users the flexibility to access a wide range of media. Additionally, the unit features a built-in VCR, allowing users to play VHS tapes, which is a nostalgic touch for those who still have a collection of tapes, from family recordings to classic movies.

The EWR10D5 utilizes advanced technologies to enhance the viewing experience. Its advanced video processing technology improves picture quality, ensuring that even older media formats are displayed with clarity and vibrancy. Moreover, the unit offers a variety of playback options, including a simple and easy-to-use on-screen menu that allows users to quickly navigate through their media library, adjust settings, and select preferences.

Another notable characteristic of the FUNAI EWR10D5 is its connectivity options. The device is equipped with multiple output connections, including composite video, S-video, and audio outputs. This ensures compatibility with a wide range of televisions and audio systems, making it easy to integrate into any home entertainment setup.

The EWR10D5 also includes features such as Real Time Taping, which allows users to record live TV shows directly onto VHS tapes, providing a valuable way to capture favorite programs. Additionally, the device has a built-in timer, making scheduling recordings hassle-free.

In terms of design, the FUNAI EWR10D5 is compact and lightweight, allowing for easy placement within any entertainment center. Its user-friendly remote control further enhances accessibility, allowing users to control playback and settings from a distance.

Overall, the FUNAI EWR10D5 stands out as a multifunctional entertainment device that caters to both modern media and vintage formats, making it an ideal choice for users looking to bridge the gap between old and new technologies. With its blend of practicality and versatility, the EWR10D5 is a valuable addition to any home entertainment system.
Top Page Image Contents