Installation
Electric oven and hobs must be connected to an electrical cooker powerpoint - consult a qualified electrician. Products must be installed in accordance with the manufacturer's safety recommendations. Failure to do so will void the manufacturer’s guarantee.
Before connecting your appliance to the mains at home, make sure to check the conformity of the voltage settings. These are specified on the information sticker attached to the appliance and/or packaging, with the usage conditions.
The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.)
Locating your built-in hob
After removing the packaging material from the appliance and its accessories, ensure that the hob is not damaged. If you suspect any damage, do not use the appliance and contact an authorised service personal, qualified electrician or Product Care, (0845 208 8750), immediately.
This
Create an opening with the dimensions shown in the picture below. The distance between the rear edge of the hob and any adjacent wall is dependent on the wall surface. Easily combustible material like curtains, paper, clothes, etc. should not be located nearby hob.
6