Installation

Electrical connection

•Electric oven and hobs must be connected to an electrical cooker powerpoint - consult a qualified electrician. Products must be installed in accordance with the manufacturer's safety recommendations.

•Before proceeding with the electrical connection, verify that the current carrying capacity of the system and the socket is adequate for the maximum power rating of the hob.

•Electrical installation of the residence and of the appliance’s plug must be earthed and conform with the required safety regulations.

•If there is no dedicated hob circuit and a fused switch, they must be installed by a qualified electrician before the hob is connected.

•A Fused switch must be easily accessible once the hob has been installed.

•Do not use adaptors, multiple sockets and/or extension leads.

•This appliance conforms with the requirements of the following EEC Directives:

1.Vitroceramic hob EEC/73/23 and 93/68, EEC/89/336 relating to radio interference,

2.EEC/89/109 relating to contact with foods.

•A circuit breaker with a contact opening of at least 3 mm, rated 20A and delayed functioning type must be installed inside the supply circuit.

For Customer Services & Spare Parts please call 0845 208 8750

Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at