Sensor Reheat/Sensor Cook, More/Less Button

Sensor Reheat/Sensor Cook

The Sensor Reheat/Sensor Cook features enable you to cook most of your favorite foods. There is no need to select the power level or cooking time as the foods are automatically cooked by detecting a build-up of steam on the humidity sensor. As foods cook in a microwave, steam is produced. When foods are covered, the steam will build up and escape from the dish and burst. This burst of steam is detected by the humidity sensor and then the oven automatically calculate the remaining cooking time. All you need to do is to select the correct cooking category.

Sensor Reheat:

1.Put the food into the oven

2.Press Sensor Reheat Button

(For Sensor Reheat)

This feature is not suitable for reheating liquids, like milk etc.

3. Press

After the burst of steam is detected by SENSOR, the remaining cooking time appears in the display window and begins to count down.

More/Less Button:

Preferences for food doneness vary with

each individual. After having using Sensor Cook a few times, you may decide you would prefer your food cooked to a different doneness. By using the More/Less Button, the programs can be adjusted to cook food for a larger or shorter time.

Press More/Less Button before pressing Start Button.

Press More Button for more cooking with indication—"More".

Press Less Button for less cooking with indication—"Less"

If you are satisfied with the result of the Auto Sensor program, you don't have to use this Button.

NOTES ON SENSOR REHEAT/SENSOR COOK:

1.Auto Sensor system works by detecting a build-up of steam on the sensor. All food cooked using the Auto Sensor should be covered with a securely fitted lid or plastic wrap. Do not pierce holes in plastic wrap. As food is cooked in a microwave oven, steam is produced. After the burst of steam escapes from under the food covering and is detected by SENSOR, a two-beep signal is heard and the oven automatically calculates the remaining cooking time, which count down in the display window.

2.When a Sensor Reheat/Sensor Cook Category is selected, the oven door should not be opened for longer than one minute. Opening the door may cause inaccurate cooking results. The oven door may be opened to stir, turn or add food when the cooking time begins to count down in the display window.

Sensor Cook:

1.Put the food into the oven

2. Press

3. Select Program 1-6

(For Sensor Cook)

Select the desired food category by turning the Time/Weight/Menu Dial until the desired number of menu appears in the display window.

4. Press

After the burst of steam is detected by SENSOR, the remaining cooking time appears in the display window and begins to count down.

NOTE:

For some menus, the remaining cooking time will not appear in the display window. This is normal.

3.The room air temperature surrounding the oven should not be above 35˚C when using the Sensor Reheat/Sensor Cook feature.

4.Food less than 125 grams should be cooked by micro power and time only, not by Sensor Reheat/Sensor Cook.

5.When the remaining cooking time is over 60 minutes, the time will appear as hours and minutes.

6.All food for Sensor Reheat/Sensor Cook is taken from their normal storage place.

7.Before using the Sensor Reheat/Sensor Cook feature make sure Glass Tray in the oven is dry to assure the best Sensor Reheat/Sensor Cook results.

8.The oven will overheat and the Sensor Reheat/Sensor Cook can't be used after using combination and grill or using micro power over 3 minutes. The "HOT" will appear, but for Auto Cook Menu feature, it can be used. After "HOT" disappears, the Sensor Reheat/Sensor Cook button can be used.

English

- Eng-11 -

IP2474_39H60KP_Eng_30_090727.indd 11

2009-7-27 Jerry 14:12:31