Display Illumination
On battery operation, you can switch on the illumination for | approx. |
15secondsby pressing the LIGHT button (1). When actuating |
|
buttons on the set ("operations"), this period will be |
|
prolonged. |
|
You can immediately switch off the illumination again by pressing | the |
LIGHT button (1) once again. |
|
• On AC (mains) operation (unit "on"), you have the choice |
|
between switched on or switched off illumination. |
|
• On AC (mains) operation (unit "off"), you can select the desired |
|
degree of brightness. (See "User Guide Via the Menu"). |
|
On AC (mains) operation, it is possible to temporarily switch on | the |
illumination as on battery operation when the |
|
permanent illumination is switched off. |
|
The Volume
•can be adjusted with the VOLUME slider control (7).
•SOUND switch (25) set to BOOST
(indication in display (4))
The output power is more than doubled.
Because of the higher current drain, this mode is only recommended during AC (mains) operation.
The Tone
•can be adjusted with the TONE switch (26) to suit your taste:
MUSIC = normal reproduction;
SPEECH= speech reproduction.
Waveband Selection
When switching the set on with the ON/OFF button, it is ready for reception and you will hear the station last tuned to.
FM
The FM band is selected with the
AM
The AM band is selected with the AM button.
-The first pressure on the AM button selects the station last tuned to in the AM band.
-Each further pressure on this button steps through the AM bands in the order
LW Æ MW Æ SW Æ LW Æ MW Æ ,etc.,
and selects the station last tuned to in the respective band.
12