Tuning to Stations with the TUNE A/V buttons
•Switch the unit on with the ON/OFF button (11) .
-The frequency tuned to appears in the display, on FM in MHz, on AM in kHz.
-A separate tuning memory is provided for each waveband. 1. Frequency Tuning in the FM Band
•Select the FM waveband.
-You hear the station last received in the FM band.
•You tune to the desired station by briefly pressing one of the buttons TUNE △ or TUNE ▽ (19). Each pressure on the button changes the tuning frequency by 25 kHz.
•A longer pressure on one of the buttons TUNE △ or TUNE ▽ (19) starts the automatic station search.
TUNE ▽ =the search is started in direction of lower frequencies.
TUNE △ =the search is started in direction of higher frequencies.
-The station search operates in the 100 kHz mode.
-The display (4) indicates AS
station search.
The automatic station search will stop as soon as it has found a station appropriate for good reception. It then can be restarted by a longer pressure on one of the TUNE △/▽ buttons.
If the found station is an RDS station, the RDS symbol and the station name (see "Special Functions on FM") will be displayed after a few moments. In addition, the display (4) indicates O for the tuning memory, and you will hear the station.
16