Panasonic FV-08vsl2 installation instructions When mounting body and blower separately

INSTALLATION (JOIST MOUNTING- ) CONTINUED

4.Insert the suspension bracket into fan body (refering to step 2 of installation , page 6).

5.Insert the fan body into joists. (Fig.9)

IMPORTANT:

Make sure that adaptor claws are properly inserted into body slots.

6.Secure the fan body to adaptor by using machine screw and plug connector to receptacle. (Fig.10)

7.Secure the suspension bracket to joists by using long screws (ST4.2X20) and secure it to fan body by using screw (ST4.2X12) in vertical direction. (Fig.11)

8.Follow step 8 to 11 of installation (page 8) to complete the installation work.

Circular duct

JoistConduit

Junction box cover

Fan body

When mounting body and blower separately

1.Loosen 4 screws (but do not remove them from blower). (Fig.12-1)

2.Remove blower section. (Fig.12-2)

3.Remove adaptor from fan body and secure it to joists as in Fig. 8 of page 8.

4.Insert fan body (without blower section) into joists. (Fig. 9)

4 Screws

Adaptor

Fig. 12-1

Blower

Fan body

Adaptor claws

Fig. 9

5.Secure the adaptor to fan body by using machine screw. (Fig. 10)

6.Secure the fan body to joists by using long screws (ST4.2X20). (Fig. 11)

Fig. 12-2

Fan body

Ceiling

7. Insert the blower into	Fig. 12-3
the fan body. (Fig. 12-3)

8. Secure the blower. (Fig. 12-4) and plug connector to receptacle. (Fig. 10)

4 Screws Screw driver

Fig. 12-4

Screw	Machine		Receptacle
		Plug connector	Fig. 10
	screw
driver
Screw	(ST4.2X12)

2 Long screws (ST4.2X20)

Joist Fig. 11

9