Panasonic FV-08vsl2 installation instructions Install the suspension bracket and the flange of fan

INSTALLATION (JOIST MOUNTING- ) CONTINUED

3.	Install the suspension bracket and the flange of fan
	body to joists by using long screws (ST4.2X20). (If
	spacing A between joists is 10 1/4~12 inches, install
	the flange of fan body according to Fig.3-2, others
	according to Fig.3-1 install the product.)
4.	Install the suspension bracket to joists by using long

Joist

	Fan body
4 Long screws (ST4.2X20)	Fig. 3-1

	screws (ST4.2X20) and secure it to the fan body by
	using screw (ST4.2X12). (Fig.4)
5.	Remove junction box cover and secure conduit or
	stress relief to junction box knock-out hole. (Fig.5)
6.	Refer to wiring diagram (page 5).
	Using wire nuts, connect house power wires to
	ventilating fan wires and lighting unit wires:
	black to black; white to white; green to green;
	Replace the junction box cover. (Fig.5)

A=10 1/4~12 inches

Fan body

Screw (ST4.2X12)

Joist

2 Long screws (ST4.2X20)

Fig. 3-2

Joist

CAUTION:

Mount junction box cover carefully so that lead wires are not pinched.

7.Squeeze the circular duct to fit the adaptor, then slipped onto the adaptor and secure it with duct tape.

Squeeze

2 Long screws	Fig. 4
(ST4.2X20)
Knock-out hole
Circular duct
Conduit	Joist
Junction box	Duct tape
cover

Conduit

Junction box

Wire nut

Green wires

Lead wires Fig. 5

7