Honeywell KNI 582 Introduction, Equipment Description, Technical Characteristics Specification

KNI 582

SECTION 1

GENERAL INFORMATION

1.1 INTRODUCTION

This manual contains information relative to the physical, mechanical, and electrical characteristics of the KNI 582 Radio Magnetic Indicator. General installation instructions are also included.

1.2 EQUIPMENT DESCRIPTION

The KNI 582 Radio Magnetic Indicator (PN 066-3060-00/01/02/03/04/10/11/12/13) provides bearing information to either ADF or VOR stations by means of two pointers, each of which is read against the compass card. The type of information displayed by each needle (assuming applicable inputs are present) is determined by the corresponding front panel switch.

A servo drive compass card with a fixed lubber line displays aircraft heading information. A flag falls into view in the upper left corner of the display when the aircraft heading information being displayed is invalid.

1.3 TECHNICAL CHARACTERISTICS

SPECIFICATION	CHARACTERISTIC
TSO Compliance:	Env. Cat. RTCA DO-160A
	A1D1/A/SKP/XXXXXSABAAA
Temperature:	-20°C to +55°C
Altitude:	50,000 feet
Compass:	TSO C6c
ADF:	TSO C41c Class A
VOR:	TSO C40a
WEIGHT and DIMENSIONS:	See Figure 2-1 KNI 582 Outline and Mounting
	Drawing.

Table 1-1 - KNI 582 RMI Technical Characteristics

Rev 3, March/2007 ©Honeywell International Inc. Do not print without express permission of Honeywell. 1-1