Panasonic FV-08VKML2, FV-08VKSL2 Maintenance I Cleaning, Maintenance II Replacement of Lamp

MAINTENANCE I (CLEANING)

WARNING:

Disconnect power source before working on unit. Routine maintenance must be done every year.

CAUTION:

1.Never use gasoline, benzene, thinner or any other such chemicals for cleaning the ventilating fan.

2.Do not allow water to get into the motor.

3.Do not soak resin parts in water over 140F (60C).

1.Remove grille pull down one mounting spring. Remove sensor unit then pull down the other mounting spring. (Squeeze mounting spring and pull down carefully.)

(Fig.21-1,21-2)

2.Wash and clean grille. (Use non-abrasive kitchen detergent, wipe dry with new cloth.) (Fig.22)

3.The grille should be dry after cleaning. (Fig.23)

Ceiling	Mounting spring
Grille	Gloves
	Fig.21-1
Ceiling
Grille	Sensor unit
	Gloves
	Fig.21-2

Gloves Fig.22

Fig.23

4.Remove dust and dirt from fan body using a vacuum cleaner. (Fig.24)

5.Using a cloth dampened with kitchen detergent, remove any dirt from fan body. Wipe dry with new cloth. (Fig.25)

6.Replace grille.

Vacuum cleaner Fig.24

Gloves Fig.25

MAINTENANCE II (REPLACEMENT OF LAMP)

WARNING:

1.Disconnect power source before working on unit.

2.The lamp's glass is fragile. Please handle with care. To remove lamp, grasp at base and move back and force to loosen. Do not pull hard on the lamp or you may break the glass.

3.4W night lamp has threaded base. Remove by turning counterclockwise.

4.Be sure to remove the night lamp before remove fluorescent lamps.

15