Accessories, Installation precautions | Panasonic AW-PH405N instruction

Accessories

Operating instructions	1
Rotary arm	1
Camera mounting base	1
Mounting screws for the rotary arm and camera
mounting base
(with flat washers, spring washers)
M522 mm	7
Camera cable	1
Tally lamp	1
Tally mounting screws (M36 mm)	2
Blank panel for tally	1

Wire mounting screws
(with flat washers, spring washers)
M48 mm	2
Inch screw	1
Hexagon key wrench	1
AC cable	2
Anti-camera-drop wire	1

Installation precautions

Do not install the unit on any of its sides.

Avoid using the unit in the kitchen and other locations with lots of steam and oily vapors.

Mount the camera on the pan-tilt head only when you have finished installing it.

The maximum weight which can be borne by this unit is 33.1 lbs (15 kg).

Do not use a lens which will impair or upset the unit’s balance.

Even if the weight by the unit is less than 33.1 lbs (15 kg), it cannot be used if the unit will be set off-balance by the lens mounted on it.

Do not install the unit outdoors or in places where the temperature will be hotter than 113°F (45°C) or colder than 23°F (–5°C).

Use the unit in places where the humidity is below 90%.

Obtain separately the screws which will be used to install the unit since they are not provided with the unit.

Do not hold or lift the unit by its rotating part. Doing so may cause malfunctioning.

Do not connect a regular LAN line or telephone line to the CONTROL IN RP connector or COM connector on the unit. Doing so may cause malfunctioning.

When performing work high off the floor or ground, make absolutely sure that the work is done by a qualified contractor.

Do not turn the unit’s rotating part by hand. Doing so may cause malfunctioning.

Dropping the unit or subjecting it to strong impact may give rise to malfunctioning.

Leave a clearance of at least 3.3 ft (1 meter) from around the monitor when installing the unit.

When mounting the camera on the unit, take sufficient steps to ensure that it will not become detached from the unit or fall onto the floor.

A length of wire for preventing the camera from dropping is provided. Read the operating instructions first, and then be absolutely sure to attach the wire and take the necessary measures to prevent the camera from falling.

Install the unit in such a way that the equipment mounted on it and its cables will not come into contact with anything when the pan-tilt head swivels, and set definite movement limits.

(For details on the limiter settings, refer to the operating instructions of the controller.)

When the unit is no longer going to be used, do not leave it in place, and be absolutely sure to remove it.

AW-PH405N specifications

The Panasonic AW-PH405N is a versatile and sophisticated robotic camera system designed for professional broadcasting and video production. Its advanced capabilities make it an ideal choice for a variety of applications, including television studios, sports events, and live productions. With its remarkable features and cutting-edge technologies, the AW-PH405N offers seamless integration into any production environment.

One of the standout features of the AW-PH405N is its exceptional image quality. The camera is equipped with a high-sensitivity 1/2.3-inch MOS sensor that delivers stunning 4K UHD (3840 x 2160) resolution. This ensures sharp, clear images even in challenging lighting conditions, making it perfect for capturing dynamic performances and fast-paced events. Additionally, the camera supports HDR (High Dynamic Range) imaging, allowing for enhanced detail in both highlights and shadows.

Another key characteristic of the AW-PH405N is its advanced panning and tilting capabilities. With a wide pan range of 175 degrees and a tilt range of 30 degrees, the camera can cover a large area, making it suitable for wide-angle shots as well as close-ups. The robotic design allows for smooth and precise movements, which is essential for live broadcasts where timing is crucial.

The AW-PH405N utilizes Panasonic's advanced tracking technology, which enables it to follow subjects automatically. This is particularly beneficial in situations where a camera operator may not be available to assist. The camera can lock onto moving subjects, adjusting its positioning in real-time to ensure they remain in frame, greatly enhancing the production's efficiency.

Connectivity is another area where the AW-PH405N excels. It features a variety of output options, including 3G-SDI and HDMI, allowing for flexible integration with other equipment and systems. Its compatibility with Panasonic’s proprietary remote control system enables operators to manage multiple cameras from a single location, streamlining the production workflow.

In conclusion, the Panasonic AW-PH405N is an exemplary robotic camera that blends advanced technology with practical functionality. Its high-resolution imaging, superior mobility, and automation features make it a reliable solution for modern broadcasting needs. Whether in a studio or on location, the AW-PH405N is engineered to deliver outstanding performance, ensuring that every shot meets the high standards of professional video production.