Weatherband Operation

OWNER’S MANUAL FOR THE WR-10

Follow the "INITIAL SETUP" instructions except put the WX – AM – FM switch to the Weather (WX) position.

1.Set the WX-AM-FM mode switch to the WEATHER (WX) position.

2.Lift the antenna from its resting position to a vertical position and extend it fully for best reception.

3.Turn the OFF/ON/VOLUME control on and set the volume to about the midpoint, The ALERT indicator (LED) should be lit indicating the unit is in the ALERT Mode and turned on.

4.Press the WEATHER button to exit the ALERT Mode (ALERT LED should turn off).

5.Set the CHANNEL selector switch on the bottom of the unit to the channel indicated from the NOAA Weather Radio Network chart inserted in this owner's guide for the location of the weather radio station nearest you.

6.Reset the VOLUME control to the desired listening level.

7.When you are finished listening to the WEATHER information, reset the radio to the ALERT MODE, (or AM-FM MODE), by pressing the ALERT button. The ALERT indicator LED will again light showing you are in the ALERT Mode. If you desire the AM or FM Mode, move the MODE SELECTOR to AM or FM and press the ALERT button. Now in the event of a weather emergency, the National Weather Service will broadcast a special electronic triggering signal for 10 seconds that causes the siren alarm to turn on, at which time the alert indicator will flash (provided the ALERT Mode selector switch is in the LED & ALARM position). Your AM or FM reception will be interrupted and the siren will sound for 10 seconds warning you that emergency weather information is being broadcast. The ALERT indicator will flash until you press the WEATHER Button for emergency weather information.

8.The ALERT Mode selector switch on the bottom of the unit allows you other alert modes without the siren.

• LED position, only the LED flashes when the National Weather Service transmits the special emergency signal.

• VOlCE position the unit lets you hear voice only from the weather station for 5 minutes without pressing the WEATHER Button. After 5 minutes, the WR-10 will reset to the AM-FM or WEATHER Mode, ready to receive the next emergency signal. During the weather report, you can reset the unit before the 5 minute period is up by pressing the ALERT Button.

• LED & ALARM position the LED will flash and the siren will sound.

NOTE: The ALERT Mode setting will determine the type of alert you get while on AM or FM reception as well.

9.Anytime the unit is in the WEATHER ALERT Mode, you can test the alert function by pressing the TEST Button. Depending on the position of the ALERT Mode selector switch, the unit will either let you hear the voice weather report, or the siren will sound and the LED will flash, or just the ALERT LED will begin flashing. After testing the alarm, be sure to return the unit to the ALERT Mode by pressing the WEATHER bar and then the ALERT bar.

	http://www.midlandradio.com	Page 6 of 9

WR-10 Weather Radio, WR-10 specifications

The Midland Radio WR-10 is a compact and reliable weather radio designed to keep you informed during severe weather conditions. This essential device is a trusted companion for outdoor enthusiasts, emergency preparedness, and anyone looking to stay updated on critical weather alerts.

One of the standout features of the WR-10 is its National Oceanic and Atmospheric Administration (NOAA) Weather Radio capabilities. The radio provides continuous broadcasts of weather information, including severe weather alerts, forecasts, and other critical data, ensuring that users are always in the know about changing conditions. In emergency situations, this feature can be a lifesaver.

The WR-10 utilizes a built-in alarm clock with a snooze function. This dual purpose allows it to serve as both a weather alert radio and a regular alarm clock, making it a versatile addition to any bedroom or kitchen. The device is equipped with a bright LED display that can be easily read in low-light conditions, ensuring that you can access vital information at any time of day or night.

In terms of portability, the WR-10 is lightweight and compact, making it easy to carry during camping trips, hikes, or other outdoor adventures. Its durable design ensures it can withstand the rigors of outdoor use, while the battery backup feature offers peace of mind in case of power outages. Users can power the device with either an AC adapter or batteries, providing flexibility and reliability.

The WR-10 also includes an earphone jack, a valuable feature for those who prefer to listen to the updates discretely. This added functionality makes it suitable for use in various environments, whether you're at home, in a public space, or enjoying a quiet moment in nature.

Overall, the Midland Radio WR-10 combines essential weather alert capabilities with user-friendly features and a compact design, making it a worthwhile investment for anyone who values safety and preparedness. Whether you are an avid outdoor adventurer or simply want to ensure you receive timely updates in case of emergencies, the WR-10 is a dependable tool to keep you informed and ready for whatever nature has in store. With its combination of technology, versatility, and practicality, the WR-10 stands out as a top choice among weather radios.