Important Information
22 Document Version 2009-03

This unit features a Bluetooth Module slot that can be used to

wirelessly connect a Bluetooth headset to the unit.

Radio Frequency Exposure Requirements (When an optional

Bluetooth Module is installed)

This product complies with FCC radiation exposure limits set forth for an
uncontrolled environment. To comply with FCC RF exposure requirements,
it must be installed and operated in accordance with provided instructions.
The unit requires minimum 20 cm (8 in) spacing must be provided between
antennas and all person’s body (excluding extremities of hands, wrists and
feet) during wireless modes of operation. This transmitter must not be co-
located or operated in conjunction with any other antenna or transmitter.
Customer Information
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the bottom of the cabinet of this
equipment is a label that contains, among other information, the following
product identifier:
US: ACJKXNANKX-DT346
If requested, this number must be provided to the telephone company.
If trouble is experienced with this equipment KX-DT333, KX-DT343, and
KX-DT346, for repair or warranty information, please contact:
Panasonic Service and Technology Company-BTS Center
415 Horizon Drive Bldg. 300 Ste. 350-B
Suwanee, GA 30024-3186
If the equipment is causing harm to the telephone network, the telephone
company may request that you disconnect the equipment until the problem
is resolved.

Hearing Aid Compatibility:

This telephone provides magnetic coupling for hearing aids.

Compliance with TIA-1083 standard:

Telephone handsets identified with this logo have
reduced noise and interference when used with T-Coil
equipped hearing aids and cochlear implants.

T

Compatible with
Hearing Aid T-Coil
TIA-1083