Location of Controls
4 Document Versio n 2009-03
HTRANSFER: Used to
transfer a call to another
party.
IREDIAL: Used to redial the
last dialed number.
JMESSAGE: Used to leave a
message waiting indication
or call back the party who left
the message waiting
indication.
KHeadset Jack
LFLASH/RECALL: Used to
disconnect the current call
and make another call
without hanging up.
MHOLD: Used to place a call
on hold.
NSP-PHONE
(Speakerphone): Used for
performing hands-free
operations.
OENTER: Used to assign the
selected item.
PMicrophone: Used for
hands-free conversations.
QNavigator Key: Used to
adjust the volume and the
display contrast or select
desired items.
RCANCEL: Used to cancel
the selected item.
SFlexible Buttons: Used to
seize a CO line or perform a
feature that has been
assigned to the key.
TLCD Panel: Can be adjusted
to the desired angle.
USoft Buttons (S1-S4): S1-
S4 (located from left to right)
are used to select the item
displayed on the bottom line
of the display.
VMessage/Ringer Lamp:
When you receive an
intercom call, the lamp
flashes green, and on an
outside call, the lamp flashes
red. When someone has left
you a message, the lamp
stays on red.