BEFORE YOU CALL FOR SERVICE
If the oven fails to operate:
A)Check to ensure that the oven is plugged in securely. If it is not, remove the plug from the outlet, wait 10 seconds and plug it in again securely.
B)Check for a blown circuit fuse or a tripped main circuit breaker. If these seem to be operating properly, test the outlet with another
appliance.
C)Check to ensure that the control panel is programmed correctly and the timer is set.
D)Check to ensure that the door is securely closed engaging the door safety lock system. Otherwise, the microwave energy will not flow into the oven.
IF NONE OF THE ABOVE RECTIFIES THE SITUATION, THEN CONTACT A QUALIFIED TECHNICIAN. DO NOT TRY TO ADJUST OR REPAIR THE OVEN YOURSELF.
INSTALLATION
1.Make sure that all the packing materials are removed from the inside of the door.
2.WARNING: Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing surface, broken or loose door hinges and latches and dents inside the cavity or on the door. If there is any damage, do not operate the oven and contact a qualified service personnel.
3.This microwave oven must be placed on a flat, stable surface to hold its weight and the heaviest food likely to be cooked in the oven.
4.Do not place the oven where heat, moisture, or high humidity are generated, or near combustible materials.
5.For correct operation, the oven must have sufficient airflow. Allow 20cm of space above the oven, 10cm at back and 5cm at both sides. Do not cover or block any openings on the appliance. Do not remove feet.
6.Do not operate the oven without glass tray, roller support, and shaft in their proper positions.
7.Make sure that the power supply cord is undamaged and does not run under the oven or over any hot or sharp surface.
8.The socket must be readily accessible so that it can be easily unplugged in an emergency.
9.Do not use the oven outdoors.
10.Please be advised that these Sanyo Microwave Ovens are not to be installed or used within an enclosed cabinet.
2