DF45070M Rev 1 19/11/04 11:01 AM Page 5
Lift the basket from the rest position and lower into the cooking position in the hot oil.
Lower the handle by pulling back the
handle release button and lower handle into its recess.
Assembly/Disassembly sequence
The fryer has to be disassembled and assembled following this procedure.
•Open the lid and remove.
•Remove the basket.
•Lift out the tank.
•Pull out the pod control.
Assembly is the reverse of the above process.
Removal of the pod
1Lift up the fryer body at the front as shown and pull out the pod.
2Replace by locating the pod in the guides and push fully in.
3Once the pod is in place route the mains cable to the side or out of the back, whichever is convenient.
Replacing the bowl
Ensure bowl contacts are dry before replacing.
5