Emptying and cleaning, Helpline | Morphy Richards DF45070M specs

DF45070M Rev 1 19/11/04 11:01 AM Page 8

Emptying and cleaning

WARNING: Cleaning should only be carried out with the plug removed from the socket. The fryer should have completely cooled. Allow 3 hours for cooling.

1Remove the lid.

2Remove the basket.

3 Lift out the bowl.

4Pour out the oil through fine muslin or absorbent paper placed in a suitable funnel into a container.

5Wash the lid, basket, handle and the inside of the tank by hand with hot soapy water.

•The lid can be washed in a dishwasher.

•The basket and bowl should NOT be washed in a dishwasher.

6Clean the body of the fryer with a warm moistened cloth, washing up liquid can be used.

WARNING: Never immerse the

control pod in water, if required remove any stains with a moistened cloth.

7Dry all parts of your fryer thoroughly and reassemble all parts with the max and min at the back of the bowl. Refer to the

assembly sequence.

•The outside of the bowl is not non-stick coated, if care is taken, it is unlikely to become dirty. If oil does drip down the exterior when the oil is being emptied out, make sure that it is hand washed thoroughly. The exterior may appear discoloured, this is quite normal and will not detract from the performance of the fryer.

Helpline

If you have any difficulty with your appliance, do not hesitate to call us.

We are more likely able to help than the store from where you bought it.

Please have the following information ready to enable our staff to deal with your query quickly.

•Name of the product

•Model number as shown on the underside of the appliance.