Middleby Marshall PS300F Tandem Oven Assembly, Oven Positioning and Alignment, Leftoven Rightoven

Page 10

ENGLISH

SECTION 2 - INSTALLATION

V. TANDEM OVEN ASSEMBLY

NOTE

For non-tandem oven installations, skip ahead to Section VI, Conveyor Installation.

1.Determine the proper position of the ovens by referring to Figure 2-7. Then, move the ovens to their approximate final locations.

2.Check that the top and bottom air finger retaining screws are present on all mating ends of the oven sections. See Figure 2-7. The screws prevent the air fingers from sliding in between the oven sections.

3.Remove the rear axial cooling fans that are adjacent to the mating sides of the ovens. The fans may either be completely disconnected, or left attached by their wiring as shown in Figure 2-8.

Figure 2-7

Oven Positioning and Alignment

LEFTOVEN

RIGHTOVEN

Alignment

plateAir finger retaining

screws

Slot for

alignment

plate

Sealing gasket

assembly

(pre-mounted)

NOTE: The Sealing Gasket Assembly may

be pre-mounted to EITHER of the oven

cavities.

Figure 2-8 - Cooling Fan Removal

Mating surface of

ovens (shown

from lower rear)

Wiring is still connected

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Owners Operating English Table of Contents Conveyor Drive Motor Moves the conveyor III Oven SpecificationsOven Uses Not ShownGeneral specifications per oven cavity Installation Additional installation kit components for gas ovens Installation KITInstallation kit components one kit required per cavity 811Recommendations II. Ventilation SystemRequirements Other ventilation concernsStacking III. AssemblyIV. Thermocouple Installation StandsLeftoven Rightoven Tandem Oven AssemblyOven Positioning and Alignment Be pre-mounted to Either of the oven CavitiesPush the ovens together. Check that the mounting bolts Frame of the right oven, pointing outward as shownReplace the rear axial cooling fans. See Figure InstallingtheConveyor-AllovensEXCEPTTandem models VI. Conveyor InstallationLift the conveyor and position it in the oven as shown Link Orientation Tandem Oven Heavy-Duty VII. Final AssemblyInstalling the Conveyor and Belt Tandem oven models Conveyor FrameAdditional Information Gas Ovens Additional Information Electric OvensConnection Gas Meter DuringpressuretestingnoteoneofthefollowingIf incoming pressure is over 14 W.C mbar, a sepa Gas LineLocation and Description of Controls II. Normal Operation STEP-BY-STEP DailystartupprocedureDailyshutdownprocedure Display, and wait forIII. Quick Reference Digital Temperature Controller Actual TempQuick Reference Troubleshooting Oven will not heat Controls may be set incor RectlyMaintenance Maintenance Daily Cooling Fan/Vent Locations PS360EWBII. Maintenance Monthly Removing Air Fingers and PlatesSplit Belt Idler Shaft Key Spare Parts Kit components all ovens Additional Key Spare Parts Kit components for gas ovens

PS300F specifications

The Middleby Marshall PS300F is an advanced pizza oven designed for high-volume operations while ensuring consistent quality and superior performance. This innovative oven combines cutting-edge technology with user-friendly features, making it an ideal choice for restaurants, pizzerias, and foodservice operations that demand efficiency and speed.

One of the standout features of the PS300F is its patented airflow technology. This system is designed to circulate hot air evenly throughout the cooking chamber, which helps create a perfectly baked pizza with a crispy crust and thoroughly cooked toppings. The even heat distribution ensures that every inch of the pizza receives the same level of cooking, reducing the chances of hot or cold spots that can affect the overall quality.

The PS300F is equipped with a double-deck design, allowing for increased production capacity without requiring additional floor space. Each deck can accommodate multiple pizzas at once, making it an ideal choice for busy establishments where speed is crucial. Operators can load pizzas into both decks simultaneously, significantly reducing cooking times during peak hours.

Another key characteristic of the PS300F is its digital control panel. This user-friendly interface allows operators to set precise cooking times and temperatures, ensuring optimal results every time. The oven also features programmable settings, enabling users to save specific cooking parameters for different types of pizzas, simplifying the process during high-volume service.

Energy efficiency is another important consideration in the design of the PS300F. The oven is constructed with high-quality insulation to minimize heat loss, contributing to lower energy consumption. This makes it not only an environmentally friendly option but also a cost-effective choice for businesses looking to reduce their utility bills.

Durability is a hallmark of the Middleby Marshall brand, and the PS300F exemplifies this commitment to quality. Built with robust materials and designed to withstand the rigors of a busy kitchen, this oven promises longevity and reliable performance.

In conclusion, the Middleby Marshall PS300F is a top-tier pizza oven that brings together innovative technology, efficiency, and durability. Its advanced features make it an excellent investment for any foodservice operation focused on delivering high-quality pizzas in a fast-paced environment. With its combination of performance and ease of use, the PS300F is poised to enhance any culinary experience.
Top Page Image Contents