Middleby Marshall PS300F installation manual Installation

Page 6

ENGLISH

SECTION 2 - INSTALLATION

WARNING - After any conversions, readjustments, or service work on the oven:

•Perform a gas leak test.

•Test for correct air supply, particularly to the burner blower.

•Test for proper combustion and gas supply.

•Check that the ventilation system is in operation.

WARNING

Keep the appliance area free and clear of combustibles.

WARNING

The oven must be installed on an even (level) non-flammable flooring and any adjacent walls must be non-flammable. Recommended minimum clearances are specified in the Description section of this Manual.

WARNING

Do not obstruct the flow of combustion and ventilation air to and from your oven. There must be no obstructions around or underneath the oven. Constructional changes to the area where the oven is installed shall not affect the air supply to the oven.

CAUTION

For additional installation information, refer to the following documents:

PS360 Pre-Installation Procedures Manual (Middleby Marshall P/N 88210-0024)

PS360 Installation Manual (Middleby Marshall P/N 88210-0025)

Or, contact your local Authorized Service Agent.

NOTE

There must be adequate clearance between the oven and combustible construction. Clearance

must also be provided for servicing and for proper operation.

NOTE

An electrical wiring diagram for the oven is located inside the machinery compartment or control

compartment.

NOTE

All aspects of the oven installation, including placement, utility connections, and ventilation requirements, must conform with any applicable local, national, or international codes. These codes supercede the require- ments and guidelines provided in this manual.

NOTE

In U.S.A., the oven installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1. The oven, when installed, must be electrically grounded in accor- dance with local codes, or in the absence of local codes, with the National Electrical Code (NEC), or ANSI/ NFPA70.

NOTE

In Canada, the oven installation must conform with local codes, or in the absence of local codes, with the Natural Gas Installation Code, CAN/CGA-B149.1, or the Propane Gas Installation Code, CAN/CGA-B149.2, as applicable. The oven, when installed, must be electrically grounded in accordance with local codes, or in the absence of local codes, with the Canadian Electrical Code CSA, C22.2, as applicable.

NOTE

For Australian installation, the oven installation must conform with AGA Code, AG601, and with any require-

ments of the appropriate statutory authority.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Owners Operating English Table of Contents Conveyor Drive Motor Moves the conveyor III Oven SpecificationsOven Uses Not ShownGeneral specifications per oven cavity Installation Additional installation kit components for gas ovens Installation KITInstallation kit components one kit required per cavity 811Recommendations II. Ventilation SystemRequirements Other ventilation concernsStacking III. AssemblyIV. Thermocouple Installation StandsLeftoven Rightoven Tandem Oven AssemblyOven Positioning and Alignment Be pre-mounted to Either of the oven CavitiesFrame of the right oven, pointing outward as shown Push the ovens together. Check that the mounting boltsReplace the rear axial cooling fans. See Figure VI. Conveyor Installation InstallingtheConveyor-AllovensEXCEPTTandem modelsLift the conveyor and position it in the oven as shown Link Orientation Tandem Oven Heavy-Duty VII. Final AssemblyInstalling the Conveyor and Belt Tandem oven models Conveyor FrameAdditional Information Electric Ovens Additional Information Gas OvensConnection Gas Meter DuringpressuretestingnoteoneofthefollowingIf incoming pressure is over 14 W.C mbar, a sepa Gas LineLocation and Description of Controls II. Normal Operation STEP-BY-STEP DailystartupprocedureDailyshutdownprocedure Display, and wait forIII. Quick Reference Digital Temperature Controller Actual TempQuick Reference Troubleshooting Oven will not heat Controls may be set incor RectlyMaintenance Maintenance Daily Cooling Fan/Vent Locations PS360EWBII. Maintenance Monthly Removing Air Fingers and PlatesSplit Belt Idler Shaft Key Spare Parts Kit components all ovens Additional Key Spare Parts Kit components for gas ovens

PS300F specifications

The Middleby Marshall PS300F is an advanced pizza oven designed for high-volume operations while ensuring consistent quality and superior performance. This innovative oven combines cutting-edge technology with user-friendly features, making it an ideal choice for restaurants, pizzerias, and foodservice operations that demand efficiency and speed.

One of the standout features of the PS300F is its patented airflow technology. This system is designed to circulate hot air evenly throughout the cooking chamber, which helps create a perfectly baked pizza with a crispy crust and thoroughly cooked toppings. The even heat distribution ensures that every inch of the pizza receives the same level of cooking, reducing the chances of hot or cold spots that can affect the overall quality.

The PS300F is equipped with a double-deck design, allowing for increased production capacity without requiring additional floor space. Each deck can accommodate multiple pizzas at once, making it an ideal choice for busy establishments where speed is crucial. Operators can load pizzas into both decks simultaneously, significantly reducing cooking times during peak hours.

Another key characteristic of the PS300F is its digital control panel. This user-friendly interface allows operators to set precise cooking times and temperatures, ensuring optimal results every time. The oven also features programmable settings, enabling users to save specific cooking parameters for different types of pizzas, simplifying the process during high-volume service.

Energy efficiency is another important consideration in the design of the PS300F. The oven is constructed with high-quality insulation to minimize heat loss, contributing to lower energy consumption. This makes it not only an environmentally friendly option but also a cost-effective choice for businesses looking to reduce their utility bills.

Durability is a hallmark of the Middleby Marshall brand, and the PS300F exemplifies this commitment to quality. Built with robust materials and designed to withstand the rigors of a busy kitchen, this oven promises longevity and reliable performance.

In conclusion, the Middleby Marshall PS300F is a top-tier pizza oven that brings together innovative technology, efficiency, and durability. Its advanced features make it an excellent investment for any foodservice operation focused on delivering high-quality pizzas in a fast-paced environment. With its combination of performance and ease of use, the PS300F is poised to enhance any culinary experience.
Top Page Image Contents