Bosch Appliances MUM 6622 UC, MUM 6630 UC specs

2.If you have not already done so, move the motor drive cover to the high-speed drive. Place the mixing bowl on the drive of the power unit and turn the bowl counterclockwise with a slight downward pressure until bowl is firmly seated, see figure 4a.

CAUTION

Failure to make sure that the bowl is properly seated on the drive coupling before the power unit is turned on can result in damage to the bowl and/or coupling.

3.Place and engage the twin beating whisk assembly on the driveshaft of the mixing bowl as shown in figure 6.

Figure 6.

4.Place the splash ring on the cover, making sure the tabs on the bowl fit into the recesses in the splash ring, and turn counterclockwise, see figure 5a. Then place the cover on the splash ring so that the tabs on the splash ring fit into the recesses in the bowl cover and turn the cover counterclockwise to fasten the bowl cover to the bowl. See figure 5b.

The splash ring and cover should be in place whenever the power unit is in operation. The splash ring and cover serve to prevent the escape of flour dust at the beginning of the stirring and kneading process, and also serves to prevent accidental contact with the moving whisks.

Placing into Operation w/Twin Beating Whisks

Make sure that the switch is in the off position, “O/Off.” Unwind the electrical cord to the necessary length and plug into the wall outlet. The bowl with whisk assembly is now ready for operation. See table 1 for examples demonstrating the use of the twin beating whisks.

Mixing bowl tips:

1.When using the mixing bowl to knead or mix a recipe designed to be prepared by hand, you will find that with the Bosch Kitchen Machine you can usually place all the ingredients in the mixing bowl at once. When doing this, always place the liquids in first. This will assure more thorough mixing.

2.When adding ingredients to a mixture:

a.Turn the rotary switch to a lower speed;

b.Remove the cover from the splash ring;

c.Add the ingredients through the cover opening and replace the cover.

3.If a large batch of dough is to be left in the mixing bowl and allowed to rise, the cover and splash ring should be removed and placed loosely on the bowl so that it is free to move if the dough should begin to press on it.