How to Use Blender

The MUM 6622 UC Bosch Universal Series Kitchen Machine includes the MUZ 6 MX2 blender accessory. The blender accessory consists of, figure 8.

The blender has been designed for crushing ice; mixing liquids; pureeing vegetables; preparing special diet and infant foods; pulverizing fruit, vegetables, nuts and dried bread (for bread crumbs); and preparing mayonnaise and sauces.

Before beginning to use this or any other attachment, make sure that the power unit is on a clean, smooth, suitable work surface and switched to off position, “O/Off,” and that you have removed the motor drive cover.

1.Before using the blender for the first time, it is recommended that the blender jar cover, closure/funnel and blade/base assembly be washed. All components, except the blade/base assembly, are dishwasher safe. Remove the blade/base assembly from the blender, see figure 9.

CAUTION

Blade/base assembly is very sharp.

Handle with care.

The blade/base assembly may be easily removed by inverting the blender and using the blender cover to fit over the tabs on the blade/base assembly. Turn it counterclockwise until it stops, see figure 9a, and then lift up, figure 9b.

Wash the blade/base assembly under running water. Do not place the blade/ base assembly in the dishwasher or allow it to stand in water. This will tend to wash out the lubricant. After cleaning, rinse thoroughly and dry before using.

Figure 9.

2.To assemble or reassemble blade/base assembly into the blender, insert the blade/base assembly into the blender jar and press down on the blade/base assembly. Turn clockwise to the stop, see figure 11. The blade/base assembly is then back in place.

Figure 10.

3.If you have not already done so, move the motor drive cover to the high-speed drive. Place the blender on the high- torque drive of the power unit and turn the blender counterclockwise with a slight downward pressure until the jar is firmly seated, see figure 11.