APW Wyott HOT FOOD WARMER service manual General Installation

Page 2

General Installation

1.Always clean equipment thoroughly before use. (See general cleaning instructions.)

2.Check rating label for your model designation & electrical rating.

3.For best results, use stainless steel countertops.

4.All dimensions in parenthesis in centimeters unless noted.

Installation instructions for EZ well supply line

1.Install P/N 54508, brass fitting in each end of the solenoid using Teflon tape (not supplied).

2.Wrap the threads of the fitting as shown in the illustration, NO. 1.

3.Remove the nut from the brass fitting and the sleeve from the inside of the fitting.

4.Place the sleeve and the nut, nut first, over the ¼” copper tubing, P/N 54578, supplied with the equipment.

5.Install the line into the solenoid and tighten the nut finger tight.

6.Using a wrench, tighten the nut far enough to crush the sleeve and attach the line. NOTE: Do not over tighten nut. Just enough pressure is required to stop water leaks.

7.Install the 3/8 x ¼ adapter to the 3/8 stainless steel tube fitting using Teflon tape as shown in illustration NO. 2.

8.Using the other end of the copper tube, install the line, nut, and sleeve to the adapter.

9.Tighten using the same procedure as before.

10.Turn on water supply and look for leaks. If any leaks are found, tighten the nuts until leak is stopped.

NOTE: With EZ-fill multi-well units, turning on any of the controls will start water to fill all of the wells. To fill, turn one control to the first position and allow all wells to fill completely. After wells are full, set controls to desired settings.

INSTALLATION MUST BE DONE BY AUTHORIZED PLUMMER.

ILLUSTRATION NO. 1.

ILLUSTRATION NO. 2.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Table of Contents EASY-FILL HOT Food WarmerGeneral Installation General Troubleshooting General Operation InstructionsInstallation APW Ezfill HOT Food WellsAPW Ezfill HOT Food Wells Options Back of left controls SM50EZ Round Soup Well DROP-IN with EZ LockSM50EZ EZ Fill Multi Wells DescriptionEZSM50-7D SM-50 Wiring Diagram EZ12D4B Small Frame Insulated TOP Mount EZ Fill HOT Food WellsHFWEZ12D EZ Fill Multi Wells HFWEZ12D Third Avenue HFWEZ-1 HFW-1D EZ Fill Multi Wells HFWEZ1D Thermostatic Control Configuration HFWEZ-2, HFWEZ-3, HFWEZ-4 HFWEZ-5, HFWEZ-6 NO. NO. Description 10 54548 SPACER, Probe HolderHFWEZ-MULTIWELLS EZ-FILL Wiring Diagram Thermostatic Control Warranty Policy

HOT FOOD WARMER specifications

The APW Wyott Hot Food Warmer is a reliable addition to any commercial kitchen, designed specifically to cater to the demands of food service operations. Combining efficiency with durability, this hot food warmer showcases numerous features and technologies that ensure food remains at the optimal serving temperature while preserving quality and freshness.

One of the primary features of the APW Wyott Hot Food Warmer is its thermostat-controlled heating system. This technology allows precise temperature management, ensuring that food is kept at a consistent and safe temperature throughout service. With adjustable temperature settings, operators can easily tailor the environment for different types of food, whether it be soups, stews, or prepared sides.

Another notable characteristic of the hot food warmer is its construction. The unit is typically made from stainless steel, which not only gives it a sleek, professional appearance but also enhances its durability. The stainless steel surface is resistant to rust and corrosion, ensuring longevity even under high-volume usage. Additionally, this material is easy to maintain, allowing for quick clean-ups in busy kitchen environments.

The APW Wyott Hot Food Warmer often features a self-serve design that enhances customer experience in buffet-style or cafeteria settings. Its clear, front-view glass allows patrons to easily see the delicious food options available, enticing them to serve themselves while maintaining a hygienic display. Some models come equipped with illuminated signs for further promotional opportunities, helping to highlight specific menu items.

The unit usually includes large capacity wells to accommodate various food pans, allowing for versatile usage. These wells are designed to evenly distribute heat, ensuring all food items remain at the desired temperature. Moreover, the hot food warmer features a secure cover, which helps to retain heat and moisture, reducing the risk of food drying out.

With easy-to-use controls and energy-efficient operation, the APW Wyott Hot Food Warmer is an essential appliance for restaurants, catering businesses, and other food service operations. It combines innovative technology with practical design, creating a user-friendly experience that caters to both operators and customers alike. This product not only helps in maintaining food safety standards but also enhances the overall presentation of the food, making it a valuable investment for any commercial kitchen.
Top Page Image Contents