PURCHASER’S RESPONSIBILITY
It is the responsibility of the purchaser:
1.To see that the gas and electric services for the oven are installed on site in accordance with the manufacturers specification.
2.To unload, uncrate, and install the oven in its proper location; in accordance with this installation / operation manual.
3.To see that the gas and electric services are connected properly by a qualified installer of your choice. For installation in the State of Massachusetts: Installation of this oven must be performed by a licensed plumber or gas fitter. All such connections must be in accordance with applicable code requirements. Refer to “Code References” section for specific information.
4.To arrange for inspection and operation
Do not attempt to operate the oven until connection of utility service has been fully inspected by an Authorized Service Technician or a Lincoln Foodservice Products, LLC Service Representative. This service is required by Lincoln Foodservice Products, LLC in order to assist the purchaser in proper
The warranty shall not apply if the oven(s) are started up and operated prior to the utilities and oven being inspected and check out made by an Authorized Service Technician or a Lincoln Foodservice Products, LLC Service Representative.
TABLE OF CONTENTS
WARNING AND SAFETY INFORMATION……………………………………………………………………...…2
PURCHASER’S RESPONSIBILITY……………………………………………………………………………...…3
FEATURES AND OPTIONS………………………………………………………………………………………… 4
EXTERIOR DIMENSIONS...………………………………………………………..……………………………..… 5
SPACING REQUIREMENTS……………………………………………………………………………………...…6
VENTILATION GUIDELINES…………………………………………………………………...…………………...6
AMBIENT TEMPERATURE REQUIREMENTS…………………….…………………………………………….. 6
CANOPY VENTILATION RECOMMENDATIONS………………………………………………………………...7
GENERAL INFORMATION………………………………………………….…………………………………….…7
UNLOADING AND UNCRATING …………..……………………………………………………………………....8
EXTERIOR DIMENSIONS…………………………………………….…………………………………………..… 8
UTILITY SERVICE LAYOUT……………………………………………………………………………………..…. 8
CODE REFERENCE……………………….………………………………………………………………………....9
RESTRAINT REQUIREMENT…………………………………………………………………………………….....9
STAND & FINGER ASSEMBLY…………………………..……………………………………………………….. 10
PROGRAMMING & OPERATION………………………………………………………………………………..… 12
PREVENTIVE & OPERATOR MAINTENANCE………………………………………………………………….. 13
CLEANING INSTRUCTIONS………………………….……………………………………………………………. 14
FINGER / CONVEYOR REMOVAL & REINSTALLATION..…………………………………………………..…15
IMPINGER® CONCEPTS……..………..…………………………………………………………………………....16
HOW TO OBTAIN SERVICE………..……………..………………………….……………..……………………... 16
FUNCTIONS – THERMAL
APPENDIX A: LABEL DEFINITIONS……………..………………………………………..……………………... 17
WARRANTY………………………………………………………………………………………………………...… 19
Impinger 3255 – Operator Manual | 3 |