Lincoln 1300 operating instructions Start-Up, Shutdown, Cleaning Instructions, Daily, Weekly

Page 9

START-UP

1.Push switch to “ON.” The electric oven should come on immediately.

2.Turn oven dial to desired temperature.

3.Preheat oven for 30 minutes.

4.To set belt speed, adjust oven time dial to reach desired time.

SHUTDOWN

1.Push switch to “OFF.”

Note: Ovens prior to serial #3018980, fan continues to operate for approximately 20 minutes. Turning on and off fan switch will reset the timer for an additional 20 minutes.

CLEANING INSTRUCTIONS

The Lincoln Impinger® oven contains electrical components. Before cleaning the oven, switch off and disconnect the oven from the electrical supply.

No electrical components should be subjected to moisture. It is therefore important that the oven is wiped down carefully. NEVER throw buckets of water over the oven or subject it to pressure washing from a hose or a pressure spray. If water or other liquid is spilled on the oven, make sure that none has entered the control box area before switching on. If in doubt, call your service company.

!

CAUTION:

Oven must be cool. Do not use power-cleaning equipment, steel wool, or wire brushes on stainless steel

surfaces.

DAILY:

1. Clean exterior surfaces of the oven by wiping it down with a mild detergent and clean water,

 

or a commercial stainless steel cleaner.

2.Clean the interior by sweeping up all loose particles, then wash with a mild detergent solution and rinse with clean water.

3.Clean the conveyor belt by wiping with a cleaning cloth or brushing with a soft wire brush. Lincoln catalog #369217.

NOTE: DO NOT USE a caustic or alkaline base cleaner on interior of oven. This will ruin the aluminized finish of the oven interior. On exterior of oven, removal of deposits of baked-on splatter, oil, grease, or light discolorations may be removed with any of several commercial cleaners. Consult with your local supplier.

!

CAUTION:

When using cleaning solutions, be sure they meet local and national health standards.

 

WEEKLY:

1. Remove fingers, disassemble and clean. See “Finger Removal” section for more

 

information.

2.Remove conveyor, disassemble and clean. See “Conveyor Removal” section for more information.

CounterTop - 1300 Series Ops Manual

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Installation & Operating Instructions Important Warning and Safety Information PURCHASER’S Responsibility Table of ContentsUtility Specification Exterior Dimensions Impinger Oven ModelsImpinger Conveyor Oven Electrical Code Reference Electrical Grounding InstructionsSpacing VentilationImpinger Assembly Instructions Front Finger AssemblyInstal Legs AS Shown For Single and DOUBLE-STACK Ovens Impinger Stacking InstructionsCountertop Mounting Instructions START-UP Cleaning InstructionsShutdown DailyPreventive Maintenance Operator MaintenanceHOW to Obtain Service Information on USE of OvenConveyor Removal & Reinstallation Disassembly Fingers Removal and Disassembly for CleaningDisassemble Fingers for Cleaning ReassemblyFingers Removal and Disassembly for Cleaning CONT’D Above ALL Other ModelsAbove Appendix a Label Definitions Appendix a Label Definitions CONT’D Limited Warranty for Commercial Products Page Page Page CounterTop 1300 Series Ops Manual

1300 specifications

The Lincoln 1300, a luxury sedan produced by the Lincoln division of Ford Motor Company during the 1980s, is emblematic of American automotive engineering and stylish design. Designed to cater to the premium car market, it offered a blend of performance, comfort, and advanced technologies of its time.

One of the main features of the Lincoln 1300 is its spacious interior, which provided ample room for both front and rear passengers. The plush leather seating, coupled with high-quality materials and meticulous craftsmanship, established an unparalleled level of comfort. The vehicle also boasted a variety of amenities, including power windows, power door locks, and an advanced sound system, ensuring a premium driving experience.

Under the hood, the Lincoln 1300 was equipped with a powerful V8 engine, which delivered impressive performance and smooth acceleration. This engine was paired with an automatic transmission that provided exceptional ease of use and responsive handling. The vehicle’s chassis was designed for stability and a smooth ride, making it well-suited for both city driving and long highway journeys.

In terms of technology, the Lincoln 1300 featured several innovations that were cutting-edge for its time. Notably, it included advanced climate control systems, providing both heating and cooling options for optimal comfort year-round. Additionally, it offered early forms of onboard diagnostics that monitored the engine’s performance and alerted the driver to potential issues.

Safety was another significant focus for the Lincoln 1300. It came equipped with robust safety features, including antilock brakes and standard airbags, which enhanced occupant protection. The vehicle also featured a sturdy construction, contributing to its solid feel and performance on the road.

Overall, the Lincoln 1300 stands out as a symbol of opulence and advanced automotive technology of the late 20th century. With its combination of luxurious features, powerful performance, and innovative design, it remains a revered model among collectors and automotive enthusiasts. The Lincoln 1300 encapsulates a bygone era of American luxury vehicles, where comfort and style were paramount, ultimately leaving a lasting legacy in the automotive world.
Top Page Image Contents