OPERATION
Use and Care (Assembly)
To use your smoothie maker, begin by assembling the mixing jar.
Stir Stick
Lid
Lid Cap
Mixing Jar
Blender Cap
Rubber Gasket
Blade Base
Dispensing Valve
Motor Base
1.Position the rubber gasket down onto the circular fl at surface in the blade base.
2Screw blade base on the bottom of the mixing jar by twisting the blade base clockwise until tightened onto the mixing jar. Make sure that the blade base is tightly fastened to the mixing jar and that the rubber gasket is properly com- pressed between the mixing jar and the blade base.
3Push the lid onto the top of the mixing jar. Place the clear lid cap in the center of the lid or place the stir stick through the center of the lid if blending liquids or frozen drinks.
4.Place the mixing jar onto the motor base so that the bottom of the blade base is sitting fl at on the motor base.
5Plug in the cord. Your smoothie maker is now ready to use!
6