5.Screw off the top hinge spindle from the top board as shown in the Top Hinge Spindle graphic.
6.Remove the parts for the bottom hinge as shown in the Bottom Hinge graphic.
Door Reversal
Cabinet
1. Remove hole plugs from left side and move them to opposite side (see Graphic 1).
Doors
1.Change the position of the door hinge hole plug and the bush (see graphic 2).
2.Remove door stop from refrigerator door and move to the other side (see graphic 3). NOTE: The left door stop of freezer door has been fixed on the handle.
3.Move the Bottom Hinge and the Hinge support to the opposite side hole of the Hinge Support. (see graphic 4)
4.Replace the parts for the bottom hinge as shown. Tighten screws. Replace the refrigerator door.
5.Screw the top hinge spindle into the left hole of the top board.
6.Assemble the parts for the center hinge as shown but not tighten screws completely and fix the freezer door.
7.Line up the doors so that the bottom of the freezer door aligns evenly with the top of the refrigerator door. Tighten all screws.
Final Steps
1.Check all holes to make sure that hole plugs and screws are in place.
2.Return all removable door parts to doors and food to product.
9